{"id":10178,"date":"2019-07-08T18:54:02","date_gmt":"2019-07-08T18:54:02","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=10178"},"modified":"2023-12-21T15:22:13","modified_gmt":"2023-12-21T15:22:13","slug":"c1195-bizhub-554e-454e","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c1195-bizhub-554e-454e","title":{"rendered":"C1195 (bizhub 554e\/454e)"},"content":{"rendered":"\n

\n\nContents<\/p>\n\n\n\n
Trouble type<\/td><\/td>Paper discharge control motor’s malfunction <When FS-534+SD-511 is installed><\/td><\/td><\/tr>
<\/td><\/td>Paper receiving guide control motor’s malfunction <When FS-535+SD-512 is installed> <\/td><\/tr>
Trouble code<\/td><\/td>C1195<\/td><\/td><\/tr>
Rank<\/td><\/td>B<\/td><\/td><\/tr>
Detection timing<\/td><\/td><When FS-534+SD-511 is installed>
The curl cover detection sensor (PS2) is not blocked or unblocked even after the set period of time has elapsed after the paper discharge control motor (M2) is turned ON. <\/td>		<\/td><\/td><\/tr>
<\/td><\/td><When FS-535+SD-512 is installed>
The paper receiving guide home sensor (PS2) is not blocked or unblocked even after the set period of time has elapsed after the paper receiving guide control motor (M2) is turned ON.<\/td>		<\/td><\/tr>
Trouble isolation<\/td><\/td>Half-Fold\/Tri-Fold Center Stapling<\/td><\/td><\/tr>
Relevant electrical parts<\/td><\/td><When FS-534+SD-511 is installed>
\u2022 Paper discharge control motor (M2)
\u2022 Curl cover detection sensor (PS2)
\u2022 SD drive board (SDDB)
\u2022 FS control board (FSCB) <\/td>		<\/td><\/td><\/tr>
<\/td><\/td><When FS-535+SD-512 is installed>
\u2022 Paper receiving guide control motor (M2)
\u2022 Paper receiving guide home sensor (PS2)
\u2022 SD drive board (SDDB)
\u2022 FS control board (FSCB)<\/td>		<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 (2)ProcedureWhen FS-534+SD-511 is installed<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical components<\/td><\/tr><\/thead>
1<\/td>Check the connector between M2-relay CN3-relay CN2-SDDB J5 for proper connection, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
2<\/td>Check the connector of M2 for proper drive coupling, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
3<\/td>Check the connector between PS2-relay CN3-relay CN2-SDDB J5 for proper connection, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
4<\/td>PS2 I\/O check, sensor check<\/td>SDDB J5-3 (ON)<\/td>SD-511 3-B<\/td><\/tr>
5<\/td>M2 operation check<\/td>SDDB J5-4 to 7<\/td>SD-511 3-B<\/td><\/tr>
6<\/td>Replace M2<\/a> (Part# A3ERPP3N00)<\/td>–<\/td>–<\/td><\/tr>
7<\/td>Replace SDDB<\/a> (Part# A3ERPP6J03)<\/td>–<\/td>–<\/td><\/tr>
8<\/td>Replace FSCB<\/a> (Part# A3EPPPBE01)<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n