{"id":10187,"date":"2019-07-08T19:02:54","date_gmt":"2019-07-08T19:02:54","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=10187"},"modified":"2023-12-21T15:19:17","modified_gmt":"2023-12-21T15:19:17","slug":"c1197-bizhub-554e-454e","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c1197-bizhub-554e-454e","title":{"rendered":"C1197 (bizhub 554e\/454e)"},"content":{"rendered":"\n

\n\nContents<\/p>\n\n\n\n
Trouble type<\/td>Tri-folding guide motor’s malfunction <When FS-534+SD-511 is installed><\/td><\/td><\/tr>
<\/td>Center fold change motor’s malfunction <When FS-535+SD-512 is installed> <\/td><\/tr>
Trouble code<\/td>C1197<\/td><\/td><\/tr>
Rank<\/td>B<\/td><\/td><\/tr>
Detection timing<\/td><When FS-534+SD-511 is installed>
The tri-folding gate home sensor (PS11) is not blocked or unblocked even after the set period of time has elapsed while the tri-folding guide motor (M6) is energized. <\/td>		<\/td><\/td><\/tr>
<\/td><When FS-535+SD-512 is installed>
The center fold change gate home sensor (PS11) is not blocked or unblocked even after the set period of time has elapsed while the center fold change motor (M8) is energized.<\/td>		<\/td><\/tr>
Trouble isolation<\/td>Half-Fold\/Tri-Fold Center Stapling<\/td><\/td><\/tr>
Relevant electrical parts<\/td><When FS-534+SD-511 is installed>
\u2022 Tri-folding guide motor (M6)
\u2022 Tri-folding gate home sensor (PS11)
\u2022 SD drive board (SDDB)
\u2022 FS control board (FSCB) <\/td>		<\/td><\/td><\/tr>
<\/td><When FS-535+SD-512 is installed>
\u2022 Center fold change motor (M8)
\u2022 Center fold change gate home sensor (PS11)
\u2022 SD drive board (SDDB)
\u2022 FS control board (FSCB)<\/td>		<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 (2)ProcedureWhen FS-534+SD-511 is installed<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical components<\/td><\/tr><\/thead>
1<\/td>Check the connector between M6-SDDB J9 for proper connection, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
2<\/td>Check the connector of M6 for proper drive coupling, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
3<\/td>Check the connector between PS11-SDDB J8 for proper connection, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
4<\/td>PS11 I\/O check, sensor check<\/td>SDDB J8-10 (ON)<\/td>SD-511 3-G<\/td><\/tr>
5<\/td>M6 operation check<\/td>SDDB J9-7 to 10<\/td>SD-511 4-F to G<\/td><\/tr>
6<\/td>Replace M6<\/a> (Part# A3ERPP5R00)<\/td>–<\/td>–<\/td><\/tr>
7<\/td>Replace SDDB<\/a> (Part# A3ERPP6J03)<\/td>–<\/td>–<\/td><\/tr>
8<\/td>Replace FSCB<\/a> (Part# A3EPPPBE01)<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n