{"id":10399,"date":"2019-07-09T13:11:44","date_gmt":"2019-07-09T13:11:44","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=10399"},"modified":"2023-12-21T14:42:37","modified_gmt":"2023-12-21T14:42:37","slug":"c0202-bizhub-754e-654e","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c0202-bizhub-754e-654e","title":{"rendered":"C0202 (bizhub 754e\/654e)"},"content":{"rendered":"\n

\n\nContents<\/p>\n\n\n\n
Trouble type<\/td>Tray 1 feeder up\/down abnormality<\/td><\/tr>
Trouble code<\/td>C0202<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Detection timing<\/td>The tray 1 upper limit sensor (PS6) is not blocked even after the lapse of a given period of time after the lifting motion has been started.<\/td><\/tr>
Trouble isolation<\/td>Tray 1<\/td><\/tr>
Relevant electrical parts<\/td>\u2022 Tray 1 upper limit sensor (PS6)
\u2022 Tray 1 lift-up motor (M6)
\u2022 Paper feed\/transport drive board (PFTDB)
\u2022 Printer control board (PRCB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 (2)Procedure<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical components<\/td><\/tr><\/thead>
1<\/td>Check the connector between M6-PFTDB CN27 for proper connection and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
2<\/td>Check the connector of M6 for proper drive coupling and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
3<\/td>Check the connector between PS6-relay CN145-PFTDB CN15 for proper connection and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
4<\/td>PS6 I\/O check, sensor check<\/td>PFTDB CN15-3 (ON)<\/td>1-P<\/td><\/tr>
5<\/td>M6 operation check<\/td>PFTDB CN27-10 to 11<\/td>2 to 3-X<\/td><\/tr>
6<\/td>Replace M6<\/a> (Part# A2X0M12001 )<\/td>–<\/td>–<\/td><\/tr>
7<\/td>Replace PFTDB<\/a> (Part# A2X0H00202 )<\/td>–<\/td>–<\/td><\/tr>
8<\/td>PRCB ICP10 conduction check<\/td>–<\/td>–<\/td><\/tr>
9<\/td>Replace PRCB<\/a> (Part# A55VH00105 )<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n