{"id":10413,"date":"2019-07-09T13:16:18","date_gmt":"2019-07-09T13:16:18","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=10413"},"modified":"2023-12-21T14:42:37","modified_gmt":"2023-12-21T14:42:37","slug":"11-02-bizhub-754e-654e","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=11-02-bizhub-754e-654e","title":{"rendered":"11-02 (bizhub 754e\/654e)"},"content":{"rendered":"\n

Contents<\/p>\n\n\n\n
JAM type<\/td>Tray 1 feed section<\/td><\/tr>
JAM code<\/td>11-02<\/td><\/tr>
Detection timing<\/td>For paper fed from the tray 1, due to a delay in paper arrival, loop forming in front of the registration roller is not complete before the rise timing of the registration motor.<\/td><\/tr>
\u2013<\/td>The tray 1 vertical transport sensor (PS4) is turned ON when the main power switch is turned ON, a door or cover is opened and closed, or a misfeed or malfunction is reset.<\/td><\/tr>
\u2013<\/td>When the main power switch is turned ON, the tray 1 vertical transport sensor (PS4) is turned ON while the tray 1 paper feed sensor (PS5) is OFF.<\/td><\/tr>
Misfeed processing location<\/td>Manual bypass tray door<\/td><\/tr>
Relevant parts<\/td>\u2022 Take-up motor (M22) 
\u2022 Tray 1 paper feed clutch (CL1) 
\u2022 Tray 1 vertical transport sensor (PS4) 
\u2022 Tray 1 paper feed sensor (PS5) 
\u2022 Paper feed\/transport drive board (PFTDB) 
\u2022 Printer control board (PRCB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 (2)Procedure<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical component<\/td><\/tr><\/thead>
1<\/td>Initial check items<\/a><\/td>\u2013<\/td>\u2013<\/td><\/tr>
2<\/td>PS4 I\/O check, sensor check<\/td>PFTDB CN15-8 (ON)<\/td>1-P<\/td><\/tr>
3<\/td>PS5 I\/O check, sensor check<\/td>PFTDB CN15-5 (ON)<\/td>1-P<\/td><\/tr>
4<\/td>CL1 operation check<\/td>PFTDB CN15-14 (REM)<\/td>2-P<\/td><\/tr>
5<\/td>M22 operation check<\/td>PFTDB CN7-5 to 8<\/td>12-X<\/td><\/tr>
6<\/td>PFTDB ICP1, ICP3 or ICP12 conduction check<\/td>\u2013<\/td>\u2013<\/td><\/tr>
7<\/td>Replace PFTDB<\/a> (Part# A2X0H00202)<\/td>\u2013<\/td>\u2013<\/td><\/tr>
8<\/td>PRCB ICP13 conduction check<\/td>\u2013<\/td>\u2013<\/td><\/tr>
9<\/td>Replace PRCB<\/a> (Part# A55VH00105)<\/td>\u2013<\/td>\u2013<\/td><\/tr><\/tbody><\/table>\n\n\n\n