{"id":105,"date":"2019-04-10T20:07:00","date_gmt":"2019-04-10T20:07:00","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=105"},"modified":"2023-12-27T18:21:12","modified_gmt":"2023-12-27T18:21:12","slug":"c0202-bizhub-c658-c558-c458","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c0202-bizhub-c658-c558-c458","title":{"rendered":"C0202 (bizhub C658\/C558\/C458)"},"content":{"rendered":"\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td>C0202: Tray 1 feeder up\/down abnormality<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Trouble detection condition<\/td>The tray 1 upper limit sensor (PS25) is not turned ON (blocked) even after the set period of time has elapsed after the paper lift-up operation for the drawer began.<\/td><\/tr>
Trouble isolation<\/td>Tray 1<\/td><\/tr>
Relevant electrical parts<\/td>\u2022Tray 1 lift-up motor (M12)
\u2022Tray 1 upper limit sensor (PS25)
\u2022MFP board (MFPB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 Procedure<\/h2>\n\n\n\n
  1. Remove thetray<\/a>\u00a0and check to see if a piece of paper is not left inside the machine.<\/li>
  2. Check the connector between M12-MFPB CN27E for proper connection and correct as necessary.<\/li>
  3. Check the connector of M12 for proper drive coupling and correct as necessary.<\/li>
  4. Check the connector between PS25-relay CN30-MFPB CN34E for proper connection and correct as necessary.<\/li>
  5. PS25 I\/O check, sensor check