{"id":10813,"date":"2019-07-09T19:40:04","date_gmt":"2019-07-09T19:40:04","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=10813"},"modified":"2023-12-21T14:26:43","modified_gmt":"2023-12-21T14:26:43","slug":"c3101-bizhub-754e-654e","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c3101-bizhub-754e-654e","title":{"rendered":"C3101 (bizhub 754e\/654e)"},"content":{"rendered":"\n

Contents <\/p>\n\n\n\n
\nTrouble type<\/td>\nFusing pressure roller separation \nfailure<\/td><\/tr>
\nTrouble code<\/td>\nC3101<\/td><\/tr>
\nRank<\/td>\nB<\/td><\/tr>
\nDetection timing<\/td>\u2022 The fusing pressure home sensor (PS55) is not turned OFF (retracted state) even after the set period of time after the fusing pressure roller retraction operation is started.
\u2022 The fusing pressure home sensor (PS55) is not OFF (retracted state) when the fusing pressure roller retraction operation is completed.
\u2022 The fusing pressure home sensor (PS55) is not turned ON (pressed state) after the set period of time after the fusing pressure roller pressure operation is started.
\u2022 The fusing pressure home sensor (PS55) is not ON (pressed state) when the fusing pressure roller pressure operation is completed. <\/td><\/tr>
\nTrouble isolation<\/td>\n–<\/td><\/tr>
\nRelevant electrical parts<\/td>\u2022 Fusing pressure home sensor (PS55)
\u2022 Fusing pressure motor (M29)
\u2022 Printer control board (PRCB) Fusing unit <\/td><\/tr><\/tbody><\/table>\n\n\n\n

\n \n(2)Procedure\n\n\n\n\n<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical components<\/td><\/tr><\/thead>
1<\/td>Check the connector between M29-PRCB CN29 for proper connection and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
2<\/td>Check the connector of M29 for proper drive coupling and correct as necessary.<\/td>
<\/td>
<\/td><\/tr>
3<\/td>Check the connector between PS55-PRCB CN17 for proper connection and correct as necessary.<\/td>
<\/td>
<\/td><\/tr>
4<\/td>PS55 I\/O check, sensor check<\/td>–<\/td>–<\/td><\/tr>
5<\/td>M29 operation check<\/td>PRCB CN29-1 to 4<\/td>8-K<\/td><\/tr>
6<\/td>Replace M29<\/a> (Part# A161M10300)<\/td>–<\/td>–<\/td><\/tr>
7<\/td>Replace the fusing unit (Other area except Taiwan<\/a>\/Only for Taiwan<\/a>)(Part# A2X0R71055)<\/td>–<\/td>–<\/td><\/tr>
8<\/td>PRCB ICP15 or ICP25 conduction check<\/td>
<\/td>
<\/td><\/tr>
9<\/td>Replace PRCB<\/a> (Part# A55VH00105)<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n