{"id":10815,"date":"2019-07-09T19:46:46","date_gmt":"2019-07-09T19:46:46","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=10815"},"modified":"2023-12-21T14:26:43","modified_gmt":"2023-12-21T14:26:43","slug":"c3102-bizhub-754e-654e","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c3102-bizhub-754e-654e","title":{"rendered":"C3102 (bizhub 754e\/654e)"},"content":{"rendered":"\n

Contents <\/p>\n\n\n\n
\nTrouble type<\/td>\nHeating roller failure to turn<\/td><\/tr>
\nTrouble code<\/td>\nC3102<\/td><\/tr>
\nRank<\/td>\nA<\/td><\/tr>
\nDetection timing<\/td>\nDuring any state other than printing operation , the \nhard latch signal from one or both of the heating roller rotation latch \ndetection 1 and the heating roller rotation latch detection 2 is turned \nON.<\/td><\/tr>
\nTrouble isolation<\/td>\n–<\/td><\/tr>
\nRelevant electrical parts<\/td>\u2022 Heating roller rotation sensor (PS56)
\u2022 Fusing motor (M30)
\u2022 Printer control board (PRCB)
\u2022 Fusing unit <\/td><\/tr><\/tbody><\/table>\n\n\n\n

\n \n(2)Procedure\n\n\n\n\n<\/p>\n\n\n\n
1<\/td>Check the fusing unit for proper installation and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
2<\/td>Check the connector between M30-PRCB CN30 for proper connection and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
3<\/td>Check the connector of M30 for proper drive coupling and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
4<\/td>PS56 I\/O check, sensor check<\/td>–<\/td>–<\/td><\/tr>
5<\/td>M30 operation check<\/td>PRCB CN30-4 (REM)PRCB CN30-7 (LOCK)<\/td>4-K<\/td><\/tr>
6<\/td>PRCB ICP15 conduction check<\/td>
<\/td>
<\/td><\/tr>
7<\/td>Replace M30<\/a> (Part# A0P0M11500)<\/td>–<\/td>–<\/td><\/tr>
8<\/td>Replace the fusing unit (Other area except Taiwan<\/a>\/Only for Taiwan<\/a>) (Part# A2X0R71055)<\/td>–<\/td>–<\/td><\/tr>
9<\/td>Replace PRCB<\/a> (Part# A55VH00105)<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n