{"id":10864,"date":"2019-07-10T18:05:05","date_gmt":"2019-07-10T18:05:05","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=10864"},"modified":"2023-12-21T14:25:30","modified_gmt":"2023-12-21T14:25:30","slug":"c1106-bizhub-754e-654e","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c1106-bizhub-754e-654e","title":{"rendered":"C1106 (bizhub 754e\/654e)"},"content":{"rendered":"\n

\n\nContents<\/p>\n\n\n\n
Trouble type<\/td>Stapler movement motors malfunction<\/td><\/tr>
Trouble code<\/td>C1106<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Detection timing<\/td><When FS-534 is installed>
\u2022 The stapler home position sensor (Rear) (PS23) is not blocked or unblocked even after the set period of time has elapsed after the side stapler movement motor (M13) turned ON.
\u2022 The stapler does not reach the specified position within the set period of time.<\/td>		<\/td><\/tr>
<\/td> <When FS-535 is installed>
\u2022 The stapler position sensor\/1\/2\/3\/4 (PS50\/PS\/51\/PS52\/PS53) is blocked or unblocked even after the set period of time has elapsed after the stapler movement motor (M13) is turned ON.<\/td><\/tr>
Trouble isolation<\/td>Staple<\/td><\/tr>
Relevant electrical parts<\/td><When FS-534 is installed>
\u2022 Side stapler movement motor (M13)
\u2022 Stapler home position sensor (Rear) (PS23)
\u2022 FS control board (FSCB) <\/td>		<\/td><\/tr>
<\/td> <When FS-535 is installed>
\u2022 Stapler movement motor (M13)
\u2022 Stapler position sensor\/1 (PS50)
\u2022 Stapler position sensor\/2 (PS51)
\u2022 Stapler position sensor\/3 (PS52)
\u2022 Stapler position sensor\/4 (PS53)
\u2022 FS control board (FSCB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 (2)ProcedureWhen FS-534 is installed<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical components<\/td><\/tr><\/thead>
1<\/td>Check the connector between M13-relay CN3-FSCB J11 for proper connection, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
2<\/td>Check the connector of M13 for proper drive coupling, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
3<\/td>Check the connector between PS23-relay CN3-FSCB J11 for proper connection, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
4<\/td>PS23 I\/O check, sensor check<\/td>FSCB J11<B>-3 (ON)<\/td>FS-534 4-C<\/td><\/tr>
5<\/td>M13 operation check<\/td>FSCB J11<A>-1 to 4<\/td>FS-534 4-C to D<\/td><\/tr>
6<\/td>Replace M13<\/a> (Part#A3EPPP9104)<\/td>–<\/td>–<\/td><\/tr>
7<\/td>Replace FSCB<\/a> (Part# A3EPPPBE01 )<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n