{"id":10916,"date":"2019-07-10T18:44:33","date_gmt":"2019-07-10T18:44:33","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=10916"},"modified":"2023-12-21T14:22:56","modified_gmt":"2023-12-21T14:22:56","slug":"c1112-bizhub-754e-654e","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c1112-bizhub-754e-654e","title":{"rendered":"C1112 (bizhub 754e\/654e)"},"content":{"rendered":"\n

\n\nContents<\/p>\n\n\n\n
Trouble type<\/td>Stapler motor’s malfunction<\/td><\/tr>
Trouble code<\/td>C1112<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Detection timing<\/td><When FS-534+SD-511 is installed>
<When FS-535+SD-512 is installed>
\u2022 The stapler home sensor is not turned ON even after the set period of time has elapsed while the stapler motor is energized.
\u2022 The stapler home sensor is not turned OFF even after the set period of time has elapsed after the stapler home sensor is turned ON. <\/td>		<\/td><\/tr>
Trouble isolation<\/td>\u2022 Staple
\u2022 Half-Fold\/Tri-Fold Center Stapling<\/td><\/tr>
Relevant electrical parts<\/td><When FS-534+SD-511 is installed><When FS-535+SD-512 is installed>
\u2022 Staple unit
\u2022 SD drive board (SDDB)
\u2022 FS control board (FSCB) <\/td>		<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 (2)ProcedureWhen FS-534+SD-511 is installed<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical components<\/td><\/tr><\/thead>
1<\/td>Check the connector between the staple unit-SDDB J4 for proper connection and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
2<\/td>Check the connector of the staple unit for proper drive coupling and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
3<\/td>Replace the staple unit<\/a> (Part# A3EP560100 )<\/td>–<\/td>–<\/td><\/tr>
4<\/td>Replace SDDB<\/a> (Part# A3ERPP6J03 )<\/td>–<\/td>–<\/td><\/tr>
5<\/td>Replace FSCB<\/a> (Part# A3EPPPBE01 )<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n