{"id":12834,"date":"2019-07-22T19:10:57","date_gmt":"2019-07-22T19:10:57","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=12834"},"modified":"2023-12-21T14:20:03","modified_gmt":"2023-12-21T14:20:03","slug":"c1081-bizhub-c754e-c654e-2","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c1081-bizhub-c754e-c654e-2","title":{"rendered":"C1081 (bizhub C754e\/C654e)"},"content":{"rendered":"\n

\n\nContents<\/p>\n\n\n\n
Trouble type<\/td>Main tray up\/down motor’s drive malfunction<\/td><\/tr>
Trouble code<\/td>C1102<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Detection timing<\/td><When FS-534 is installed>
\u2022 While the exit tray is being lifted, the main tray upper position sensor (PS26\/PS27) is not blocked and the main tray upper position detect switch (SW2) is not turned ON, even after the main tray up\/down motor (M11) turns by the set number of times.
\u2022 While the exit tray is being lowered, the main tray full detection sensor (PS29) is not blocked after the set period of time has elapsed after the main tray up\/down motor (M11) is turned ON. <\/td>		<\/td><\/tr>
<\/td><When FS-535 is installed>
\u2022 The main tray upper limit sensor (PS44\/PS45) is turned ON even after the set period of time has elapsed while the main tray up\/down motor (M5) is energized.
\u2022 The staple paper exit top surface sensor (PS7) is unblocked even after the set period of time has elapsed while the main tray up\/down motor (M5) is energized.<\/td><\/tr>
Trouble isolation<\/td>–<\/td><\/tr>
Relevant electrical parts<\/td><When FS-534 is installed>
\u2022 Main tray up\/down motor (M11)
\u2022 Main tray upper position sensor\/R (PS26)
\u2022 Main tray upper position sensor\/F (PS27)
\u2022 Main tray full detection sensor (PS29)
\u2022 Main tray upper position detect switch (SW2)
\u2022 FS control board (FSCB) <\/td>		<\/td><\/tr>
<\/td><When FS-535 is installed>
\u2022 Main tray up\/down motor (M5)
\u2022 Main tray upper limit sensor\/in (PS44)
\u2022 Main tray upper limit sensor\/out (PS45)
\u2022 Staple paper exit top surface sensor (PS7)
\u2022 FS control board (FSCB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 (2)ProcedureWhen FS-534 is installed<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical components<\/td><\/tr><\/thead>
1<\/td>Check the motor and sensor connectors for proper connection, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
2<\/td>Check the connector of M11 for proper drive coupling, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
3<\/td>PS26 I\/O check, sensor check<\/td>FSCB J14<A>-5 (ON)<\/td>FS-534 2-C<\/td><\/tr>
4<\/td>PS27 I\/O check, sensor check<\/td>FSCB J14<B>-8 (ON)<\/td>FS-534 3-C<\/td><\/tr>
5<\/td>PS29 I\/O check, sensor check<\/td>FSCB J14<A>-8 (ON)<\/td>FS-534 4-C<\/td><\/tr>
6<\/td>SW2 operation check<\/td>FSCB J10-1~2<\/td>FS-534 8-K<\/td><\/tr>
7<\/td>M11 operation check<\/td>FSCB J9<A>-9 to 10<\/td>FS-534 10-C to D<\/td><\/tr>
8<\/td>Replace M11<\/a> (Part# A3EPPPA703)<\/td>–<\/td>–<\/td><\/tr>
9<\/td>Replace FSCB<\/a> (Part# A3EPPPBE01)<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n