{"id":12840,"date":"2019-07-22T20:01:13","date_gmt":"2019-07-22T20:01:13","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=12840"},"modified":"2023-12-21T14:20:03","modified_gmt":"2023-12-21T14:20:03","slug":"c1105-bizhub-c754e-c654e","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c1105-bizhub-c754e-c654e","title":{"rendered":"C1105 (bizhub C754e\/C654e)"},"content":{"rendered":"\n

\n\nContents<\/p>\n\n\n\n
Trouble type<\/td>Bundle eject motor’s drive malfunction (When FS-534 is installed)<\/td><\/td><\/tr>
<\/td>Paper output roller motor’s drive malfunction (When FS-535 is installed) <\/td><\/tr>
Trouble code<\/td>C1105<\/td><\/td><\/tr>
Rank<\/td>B<\/td><\/td><\/tr>
Detection timing<\/td><When FS-534 is installed>
\u2022 The gripper home position sensor (PS18) does not block even after the set period of time has elapsed after the gripper position detection sensor (PS19) unblocked.
\u2022 The gripper position detection sensor (PS19) does not block even after the set period of time has elapsed after it unblock
\u2022 The gripper position detection sensor (PS19) does not block even after the set period of time has elapsed after the gripper home position sensor (PS18) unblocked.
\u2022 The gripper home position sensor (PS18) does not block even after the set period of time has elapsed after the bundle eject motor (M10) unblocked.
\u2022 The gripper home position sensor (PS18) and the gripper position detection sensor (PS19) are blocked at the same time. <\/td>		<\/td><\/td><\/tr>
<\/td><When FS-535 is installed>
The paper output roller home sensor (PS10) is not blocked or unblocked even after the set period of time has elapsed after the paper output roller motor (M6) is turned ON.<\/td>		<\/td><\/tr>
Trouble isolation<\/td>–<\/td><\/td><\/tr>
Relevant electrical parts<\/td><When FS-534 is installed>
\u2022 Bundle eject motor (M10)
\u2022 Gripper home position sensor (PS18)
\u2022 Gripper position detection sensor (PS19)
\u2022 FS control board (FSCB) <\/td>		<\/td><\/td><\/tr>
<\/td><When FS-535 is installed>
\u2022 Paper output roller motor (M6
\u2022 )Paper output roller home sensor (PS10)
\u2022 FS control board (FSCB)<\/td>		<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 (2)ProcedureWhen FS-534 is installed<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical components<\/td><\/tr><\/thead>
1<\/td>Check the motor and sensor connectors for proper connection, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
2<\/td>Check the connector of M10 for proper drive coupling, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
3<\/td>PS18 I\/O check, sensor check<\/td>FSCB J13-13 (ON)<\/td>FS-534 7-C<\/td><\/tr>
4<\/td>PS19 I\/O check, sensor check<\/td>FSCB J12-3 (ON)<\/td>FS-534 7-C<\/td><\/tr>
5<\/td>M10 operation check<\/td>FSCB J13-1 to 2<\/td>FS-534 8-C to D<\/td><\/tr>
6<\/td>Replace M10<\/a> (Part# A87GPP1400)<\/td>–<\/td>–<\/td><\/tr>
7<\/td>Replace FSCB<\/a> (Part# A3EPPPBE01)<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n