{"id":129,"date":"2019-04-11T13:40:00","date_gmt":"2019-04-11T13:40:00","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=129"},"modified":"2023-12-27T18:21:11","modified_gmt":"2023-12-27T18:21:11","slug":"c0211-bizhub-c658-c558-c458","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c0211-bizhub-c658-c558-c458","title":{"rendered":"C0211 (bizhub C658\/C558\/C458)"},"content":{"rendered":"\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td>C0211: Manual feed up\/down abnormality<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Trouble detection condition<\/td>\u2022The bypass lift-up position sensor (PS26) is not turned OFF (unblock) even after the transport motor (M1) rotates for a given period of time after the position is switched from stand by position at lift-up plate to the feed position.
\u2022The bypass lift-up position sensor (PS26) is not turned ON (blocked) even after the transport motor (M1) rotates for a given period of time after the position is switched from stand by position at lift-up plate to the feed position. <\/td><\/tr><\/tbody><\/table>\n\n\n\n
Trouble isolation<\/td>Manual<\/td><\/tr>
Relevant electrical parts<\/td>\u2022Transport motor (M1)
\u2022Bypass pick-up solenoid (SD1)
\u2022Bypass lift-up position sensor (PS26)
\u2022MFP board (MFPB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

Procedure<\/h2>\n\n\n\n
  1. Check the connector between M1-MFPB CN14E for proper connection and correct as necessary.<\/li>
  2. Check the connector of M1 for proper drive coupling and correct as necessary.<\/li>
  3. Check the connector between PS26-relay CN19-MFPB CN19E for proper connection and correct as necessary.<\/li>
  4. Check the connector between SD1-relay CN21-relay CN19-MFPB CN19E for proper connection and correct as necessary.<\/li>
  5. PS26 I\/O check, sensor check