{"id":1335,"date":"2019-05-01T13:00:08","date_gmt":"2019-05-01T13:00:08","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=1335"},"modified":"2023-12-27T18:02:35","modified_gmt":"2023-12-27T18:02:35","slug":"c2152-bizhub-c658-c558-c458","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c2152-bizhub-c658-c558-c458","title":{"rendered":"C2152 (bizhub C658\/C558\/C458)"},"content":{"rendered":"\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td>C2152: Transfer belt fault at initial position return<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Trouble detection condition<\/td>The 1st transfer pressure sensor (PS39) is unable to detect “switch from retraction to pressure” or “switch from pressure to retraction” within a given period time after the 1st transfer pressure clutch (CL5) has stared engagement during an initial position return.<\/td><\/tr>
Trouble isolation<\/td>–<\/td><\/tr>
Relevant electrical parts<\/td>\u2022 Fusing motor (M3)
\u2022 1st transfer pressure clutch (CL5)
\u2022 1st transfer pressure sensor (PS39)
\u2022 Expansion control board (EXCB)
\u2022 MFP board (MFPB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 Procedure<\/h2>\n\n\n\n
  1. Check the connector between M3-MFPB CN14E for proper connection and correct as necessary.<\/li>
  2. Check the connector of M3 for proper drive coupling and correct as necessary.<\/li>
  3. Check the connector between PS39-relay CN113-MFPB CN15E for proper connection and correct as necessary.<\/li>
  4. Check the connector between CL5-relay CN118-EXCB CN8 for proper connection and correct as necessary.<\/li>
  5. PS39 I\/O check, sensor check