{"id":13642,"date":"2019-07-29T19:54:35","date_gmt":"2019-07-29T19:54:35","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=13642"},"modified":"2023-12-18T19:55:53","modified_gmt":"2023-12-18T19:55:53","slug":"c1109-bizhub-c364e-c284e-c224e","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c1109-bizhub-c364e-c284e-c224e","title":{"rendered":"C1109 (bizhub C364e\/C284e\/C224e)"},"content":{"rendered":"\n

\n\nContents<\/p>\n\n\n\n
Trouble type<\/td>Stapler motor’s drive malfunction<\/td><\/tr>
Trouble code<\/td>C1109<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Detection timing<\/td><When FS-533 is installed>
The stapler home sensor (PS110) is not blocked even after the set period of time has elapsed after the stapler motor turned ON. <\/td>		<\/td><\/tr>
<\/td><When FS-534 is installed>
\u2022 The stapler home position sensor (Rear) (PS23) is not blocked or unblocked even after the set period of time has elapsed after the stapler motor (M14) turned ON.
\u2022 The stapler position sensor (Center) (PS24) is blocked, when the stapler motor (M14) is running.<\/td><\/tr>
Trouble isolation<\/td>Staple<\/td><\/tr>
Relevant electrical parts<\/td><When FS-533 is installed>
\u2022 Stapler home sensor (PS110)
\u2022 Stapler unitStapler relay board (STREYB)
\u2022 FS control board (FSCB) <\/td>		<\/td><\/tr>
<\/td><When FS-534 is installed>
\u2022 Stapler home position sensor (Rear) (PS23)
\u2022 Stapler unitStapler position sensor (Center) (PS24)
\u2022 FS control board (FSCB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 (2)ProcedureWhen FS-533 is installed<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical components<\/td><\/tr><\/thead>
1<\/td>Check the connector between the stapler unit-STREYB CN122 and CN123 for proper connection and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
2<\/td>Check the connector of the stapler unit for proper drive coupling and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
3<\/td>Check the connector between PS110-FSCB CN110 for proper connection and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
4<\/td>PS110 I\/O check, sensor check<\/td>FSCB CN110<\/td>FS-533 8-D to E<\/td><\/tr>
5<\/td>Replace the stapler unit<\/a> (Part# A2YUPPK401)<\/td>–<\/td>–<\/td><\/tr>
6<\/td>Replace STREYB<\/a> (Part# A2YUPPG700)<\/td>–<\/td>–<\/td><\/tr>
7<\/td>Replace FSCB<\/a> (Part# A2YUPPH901(Model No. A2YU-WY1) or A2YUPPXN00 (Model No. A2YU-WY2))<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n