{"id":14215,"date":"2019-09-17T19:13:49","date_gmt":"2019-09-17T19:13:49","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=14215"},"modified":"2023-12-18T19:43:59","modified_gmt":"2023-12-18T19:43:59","slug":"c0208-bizhub-c754-c654","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c0208-bizhub-c754-c654","title":{"rendered":"C0208 (bizhub C754\/C654)"},"content":{"rendered":"\n

\n\nContents<\/p>\n\n\n\n
Trouble type<\/td>Tray 4 feeder up\/down abnormality<\/td><\/tr>
Trouble code<\/td>C0208<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Detection timing<\/td>The tray 4 upper limit sensor is not blocked even after the lapse of a given period of time after the lifting motion has been started.<\/td><\/tr>
Trouble isolation<\/td>Tray 4<\/td><\/tr>
Relevant electrical parts<\/td>-Tray 4 upper limit sensor (PS27)
-Tray 4 lift-up motor (M24)
-Paper feed\/transport drive board (PFTDB)
-Printer control board (PRCB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

(2)Procedure<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical components<\/td><\/tr><\/thead>
1<\/td>Check the connector between M24-PFTDB CN18 for proper connection and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
2<\/td>Check the connector of M24 for proper drive coupling and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
3<\/td>Check the connector between PS27-relay CN194-relay CN121B-PFTDB CN22 for proper connection and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
4<\/td>PS27 I\/O check, sensor check<\/td>PFTDB CN22-6 (ON)<\/td>8-X<\/td><\/tr>
5<\/td>M24 operation check<\/td>PFTDB CN18-1 to 2<\/td>9-X<\/td><\/tr>
6<\/td>Replace M24<\/a> (Part# A2X0M12101)<\/td>–<\/td>–<\/td><\/tr>
7<\/td>PFTDB ICP8 conduction check<\/td>–<\/td>–<\/td><\/tr>
8<\/td>Replace PFTDB<\/a> (Part# A2X0H00202)<\/td>–<\/td>–<\/td><\/tr>
9<\/td>Replace PRCB<\/a> (Part# A2X0H00102)<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n