{"id":14339,"date":"2019-09-18T18:54:59","date_gmt":"2019-09-18T18:54:59","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=14339"},"modified":"2023-12-18T19:43:16","modified_gmt":"2023-12-18T19:43:16","slug":"c1102-bizhub-c754-c654","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c1102-bizhub-c754-c654","title":{"rendered":"C1102 (bizhub C754\/C654)"},"content":{"rendered":"\n

\n\nContents<\/p>\n\n\n\n
Trouble type<\/td>Main tray up\/down motors drive malfunction<\/td><\/tr>
Trouble code<\/td>C1102<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Detection timing<\/td><When FS-534 is installed>
-While the exit tray is being lifted, the main tray upper position sensor (PS26\/PS27) is not blocked and the main tray upper position detect switch (SW2) is not turned ON, even after the main tray up\/down motor (M11) turns by the set number of times.
-While the exit tray is being lowered, the main tray full detection sensor (PS29) is not blocked after the set period of time has elapsed after the main tray up\/down motor (M11) is turned ON. <\/td>		<\/td><\/tr>
<\/td><When FS-535 is installed>
-The main tray upper limit sensor (PS44\/PS45) is turned ON even after the set period of time has elapsed while the main tray up\/down motor (M5) is energized.
-The staple paper exit top surface sensor (PS7) is unblocked even after the set period of time has elapsed while the main tray up\/down motor (M5) is energized.<\/td><\/tr>
Trouble isolation<\/td>–<\/td><\/tr>
Relevant electrical parts<\/td><When FS-534 is installed>
-Main tray up\/down motor (M11)
-Main tray upper position sensor\/R (PS26)
-Main tray upper position sensor\/F (PS27)
-Main tray full detection sensor (PS29)
-Main tray upper position detect switch (SW2)
-FS control board (FSCB) <\/td>		<\/td><\/tr>
<\/td><When FS-535 is installed>
-Main tray up\/down motor (M5)
-Main tray upper limit sensor\/in (PS44)
-Main tray upper limit sensor\/out (PS45)
-Staple paper exit top surface sensor (PS7)
-FS control board (FSCB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

(2)ProcedureWhen FS-534 is installed<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical components<\/td><\/tr><\/thead>
1<\/td>Check the motor and sensor connectors for proper connection, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
2<\/td>Check the connector of M11 for proper drive coupling, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
3<\/td>PS26 I\/O check, sensor check<\/td>FSCB J14<A>-5 (ON)<\/td>FS-534 2-C<\/td><\/tr>
4<\/td>PS27 I\/O check, sensor check<\/td>FSCB J14<B>-8 (ON)<\/td>FS-534 3-C<\/td><\/tr>
5<\/td>PS29 I\/O check, sensor check<\/td>FSCB J14<A>-8 (ON)<\/td>FS-534 4-C<\/td><\/tr>
6<\/td>SW2 operation check<\/td>FSCB J10-1~2<\/td>FS-534 8-K<\/td><\/tr>
7<\/td>M11 operation check<\/td>FSCB J9<A>-9 to 10<\/td>FS-534 10-C to D<\/td><\/tr>
8<\/td>Replace M11<\/a> (Part# A3EPPPA703)<\/td>–<\/td>–<\/td><\/tr>
9<\/td>Replace FSCB<\/a> (Part# A3EPPPBE01)<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n