{"id":14341,"date":"2019-09-19T12:03:40","date_gmt":"2019-09-19T12:03:40","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=14341"},"modified":"2023-12-18T19:42:13","modified_gmt":"2023-12-18T19:42:13","slug":"c1103-bizhub-c754-c654","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c1103-bizhub-c754-c654","title":{"rendered":"C1103 (bizhub C754\/C654)"},"content":{"rendered":"\n

\n\nContents<\/p>\n\n\n\n
Trouble type<\/td>Alignment plate motor\/Frs malfunction<\/td><\/tr>
Trouble code<\/td>C1103<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Detection timing<\/td><When FS-534 is installed>
-The alignment plate\/F home sensor (PS12) is not unblocked after the set period of time has elapsed after the plate drive starts from the home position.
-The alignment plate\/F home sensor (PS12) is not blocked after the set period of time has elapsed after the alignment motor\/front (M7) is turned ON to return the plate to the home position.
-The alignment plate\/F does not reach the specified position within the set period of time. <\/td>		<\/td><\/tr>
<\/td> <When FS-535 is installed>
The alignment plate motor home sensor\/Fr (PS17) is not blocked even after the set period of time has elapsed while the Alignment plate motor\/Fr (M11) is energized.<\/td><\/tr>
Trouble isolation<\/td>–<\/td><\/tr>
Relevant electrical parts<\/td><When FS-534 is installed>
-Alignment motor\/Front (M7)
-Alignment plate\/F home sensor (PS12)
-FS control board (FSCB) <\/td>		<\/td><\/tr>
<\/td><When FS-535 is installed>
-Alignment plate motor\/Fr (M11)
-Alignment plate motor home sensor\/F (PS17)
-FS control board (FSCB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

(2)ProcedureWhen FS-534 is installed<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical components<\/td><\/tr><\/thead>
1<\/td>Check the connector between M7-FSCB J4 for proper connection and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
2<\/td>Check the connector of M7 for proper drive coupling, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
3<\/td>Check the connector between PS12-FSCB J4 for proper connection and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
4<\/td>PS12 I\/O check, sensor check<\/td>FSCB J4<B>-4 (ON)<\/td>FS-534 13-C<\/td><\/tr>
5<\/td>M7 operation check<\/td>FSCB J4<A>-5 to 8<\/td>FS-534 11-C to D<\/td><\/tr>
6<\/td>Replace M7<\/a> (Part# A3EPPP5500)<\/td>–<\/td>–<\/td><\/tr>
7<\/td>Replace FSCB<\/a> (Part# A3EPPPBE01)<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n