{"id":14347,"date":"2019-09-19T12:15:12","date_gmt":"2019-09-19T12:15:12","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=14347"},"modified":"2023-12-18T19:42:13","modified_gmt":"2023-12-18T19:42:13","slug":"c1106-bizhub-c754-c654","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c1106-bizhub-c754-c654","title":{"rendered":"C1106 (bizhub C754\/C654)"},"content":{"rendered":"\n

\n\nContents<\/p>\n\n\n\n
Trouble type<\/td>Stapler movement motor malfunction<\/td><\/tr>
Trouble code<\/td>C1106<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Detection timing<\/td><When FS-534 is installed>
-The stapler home position sensor (Rear) (PS23) is not blocked or unblocked even after the set period of time has elapsed after the side stapler movement motor (M13) turned ON.
-The stapler does not reach the specified position within the set period of time. <\/td>		<\/td><\/tr>
<\/td><When FS-535 is installed>
The stapler position sensor\/1\/2\/3\/4 (PS50\/PS\/51\/PS52\/PS53) is blocked or unblocked even after the set period of time has elapsed after the stapler movement motor (M13) is turned ON.<\/td><\/tr>
Trouble isolation<\/td>Staple<\/td><\/tr>
Relevant electrical parts<\/td><When FS-534 is installed>
-Side stapler movement motor (M13)
-Stapler home position sensor (Rear) (PS23)
-FS control board (FSCB) <\/td>		<\/td><\/tr>
<\/td><When FS-535 is installed>
-Stapler movement motor (M13)
-Stapler position sensor\/1 (PS50)
-Stapler position sensor\/2 (PS51)
-Stapler position sensor\/3 (PS52)
-Stapler position sensor\/4 (PS53)
-FS control board (FSCB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

(2)ProcedureWhen FS-534 is installed<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical components<\/td><\/tr><\/thead>
1<\/td>Check the connector between M13-relay CN3-FSCB J11 for proper connection, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
2<\/td>Check the connector of M13 for proper drive coupling, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
3<\/td>Check the connector between PS23-relay CN3-FSCB J11 for proper connection, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
4<\/td>PS23 I\/O check, sensor check<\/td>FSCB J11<B>-3 (ON)<\/td>FS-534 4-C<\/td><\/tr>
5<\/td>M13 operation check<\/td>FSCB J11<A>-1 to 4<\/td>FS-534 4-C to D<\/td><\/tr>
6<\/td>Replace M13<\/a> (Part# A3EPPP9104)<\/td>–<\/td>–<\/td><\/tr>
7<\/td>Replace FSCB<\/a> (Part# A3EPPPBE01)<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n