{"id":14375,"date":"2019-09-19T14:04:37","date_gmt":"2019-09-19T14:04:37","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=14375"},"modified":"2023-12-18T19:42:12","modified_gmt":"2023-12-18T19:42:12","slug":"c1135-bizhub-c754-c654","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c1135-bizhub-c754-c654","title":{"rendered":"C1135 (bizhub C754\/C654)"},"content":{"rendered":"\n

\n\nContents<\/p>\n\n\n\n
Trouble type<\/td>Punch motor drive malfunction<\/td><\/tr>
Trouble code<\/td>C1135<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Detection timing<\/td><When FS-535+ZU-606 is installed>
The punch motor (M604) is not turned OFF even after the set period of time has elapsed after it is turned ON. <\/td>		<\/td><\/tr>
Trouble isolation<\/td>–<\/td><\/tr>
Relevant electrical parts<\/td>-Punch motor (M604)
-ZU control board (ZUCB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

(2)Procedure<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical components<\/td><\/tr><\/thead>
1<\/td>Check the connector between M604-relay CN644-relay CN638-ZUCB CN11 for proper connection, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
2<\/td>Check the connector of M604 for proper drive coupling, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
3<\/td>M604 operation check<\/td>ZUCB CN11-2 (DRV)<\/td>ZU-606 7-C<\/td><\/tr>
4<\/td>Replace M604 (Part# A111A9160)<\/td>–<\/td>–<\/td><\/tr>
5<\/td>ZUCB ICP10 conduction check<\/td>–<\/td>–<\/td><\/tr>
6<\/td>Replace ZUCB<\/a> (Part# A109H01002)<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n