{"id":14400,"date":"2019-09-19T15:43:24","date_gmt":"2019-09-19T15:43:24","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=14400"},"modified":"2023-12-18T19:41:54","modified_gmt":"2023-12-18T19:41:54","slug":"c1196-bizhub-c754-c654","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c1196-bizhub-c754-c654","title":{"rendered":"C1196 (bizhub C754\/C654)"},"content":{"rendered":"\n

\n\nContents<\/p>\n\n\n\n
Trouble type<\/td>Center fold roller motor malfunction (When FS-534+SD-511 is installed)<\/td><\/td><\/tr>
<\/td>Tri-fold guide motor malfunction (When FS-535+SD-512 is installed) <\/td><\/tr>
Trouble code<\/td>C1196<\/td><\/td><\/tr>
Rank<\/td>B<\/td><\/td><\/tr>
Detection timing<\/td><When FS-534+SD-511 is installed>
The guide home sensor (PS7) is not blocked or unblocked even after the set period of time has elapsed after the center fold roller motor (M6) is turned ON. <\/td>		<\/td><\/td><\/tr>
<\/td><When FS-535+SD-512 is installed>
The tri-fold guide home sensor (PS7) is not not blocked or unblocked even after the set period of time has elapsed after the tri-fold guide motor (M6) is turned ON.<\/td>		<\/td><\/tr>
Trouble isolation<\/td>Half-Fold\/Tri-Fold Center Stapling<\/td><\/td><\/tr>
Relevant electrical parts<\/td><When FS-534+SD-511 is installed>
-Center fold roller motor (M8)
-Guide home sensor (PS7)
-SD drive board (SDDB)
-FS control board (FSCB) <\/td>		<\/td><\/td><\/tr>
<\/td><When FS-535+SD-512 is installed>
-Tri-fold guide motor (M6)
-Tri-fold guide home sensor (PS7)
-SD drive board (SDDB)
-FS control board (FSCB)<\/td>		<\/td><\/tr><\/tbody><\/table>\n\n\n\n

(2)ProcedureWhen FS-534+SD-511 is installed<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical components<\/td><\/tr><\/thead>
1<\/td>Check the connector between M8-SDDB J8 for proper connection, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
2<\/td>Check the connector of M8 for proper drive coupling, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
3<\/td>Check the connector between PS7-SDDB J9 for proper connection, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
4<\/td>PS7 I\/O check, sensor check<\/td>SDDB J9-6 (ON)<\/td>SD-511 4-G<\/td><\/tr>
5<\/td>M8 operation check<\/td>SDDB J10 6 to 9<\/td>SD-511 1 to 2-F to G<\/td><\/tr>
6<\/td>Replace M8<\/a> (Part# A3ERPP3N00)<\/td>–<\/td>–<\/td><\/tr>
7<\/td>Replace SDDB<\/a> (Part# A3ERPP6J03)<\/td>–<\/td>–<\/td><\/tr>
8<\/td>Replace FSCB<\/a> (Part# A3EPPPBE01)<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n