{"id":14432,"date":"2019-09-19T18:54:09","date_gmt":"2019-09-19T18:54:09","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=14432"},"modified":"2023-12-18T19:41:33","modified_gmt":"2023-12-18T19:41:33","slug":"c0202-bizhub-c3320i","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c0202-bizhub-c3320i","title":{"rendered":"C0202 (bizhub C3320i)"},"content":{"rendered":"\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td>C0202: Tray 1 feeder up\/down abnormality<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Trouble detection condition<\/td>The tray 1 upper limit sensor (PS7) is not turned ON (blocked) even after the set period of time has elapsed after the paper lift-up operation for the drawer began.<\/td><\/tr>
Trouble isolation<\/td>Tray 1<\/td><\/tr>
Relevant electrical parts<\/td>Tray 1 lift-up motor (M6)Tray 1 upper limit sensor (PS7)CPU board (CPUB)Base board (BASEB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

Procedure<\/h2>\n\n\n\n
  1. Remove the tray<\/a>\u00a0and check to see if a piece of paper is not left inside the machine.<\/li>
  2. Check the connector between M6-BASEB CN19E for proper connection and correct as necessary.<\/li>
  3. Check the connector of M6 for proper drive coupling and correct as necessary.<\/li>
  4. Check the connector between PS7-BASEB CN22E for proper connection and correct as necessary.<\/li>
  5. Check CPUB for proper installation and correct as necessary.<\/li>
  6. PS7 I\/O check, sensor check