{"id":14435,"date":"2019-09-19T18:58:07","date_gmt":"2019-09-19T18:58:07","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=14435"},"modified":"2023-12-18T19:41:33","modified_gmt":"2023-12-18T19:41:33","slug":"c0204-bizhub-c3320i","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c0204-bizhub-c3320i","title":{"rendered":"C0204 (bizhub C3320i)"},"content":{"rendered":"\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td>C0204: Tray 2 feeder up\/down abnormality (When PF-P20 or PF-P21 is installed)<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Trouble detection condition<\/td>The tray 2 upper limit sensor (PS2\/2) is not turned ON (blocked) even after the set period of time has elapsed after the paper lift-up operation for the drawer began.<\/td><\/tr>
Trouble isolation<\/td>Tray 2<\/td><\/tr>
Relevant electrical parts<\/td>-Tray 2 lift-up motor (M2\/2)
-Tray 2 upper limit sensor (PS2\/2)
-Tray 2 PC control board (PCCB\/2)
-CPU board (CPUB)
-Base board (BASEB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

Procedure<\/h2>\n\n\n\n
  1. Remove the tray<\/a>\u00a0and check to see if a piece of paper is not left inside the machine.<\/li>
  2. Check the connector between M2\/2-PCCB\/2 CN4 for proper connection and correct as necessary.<\/li>
  3. Check the connector of M2\/2 for proper drive coupling and correct as necessary.<\/li>
  4. Check the connector between PS2\/2-PCCB\/2 CN3 for proper connection and correct as necessary.<\/li>
  5. Check the connector between PCCB\/2 CN1-relay CN24-BASEB CN21E for proper connection and correct as necessary.<\/li>
  6. Check CPUB for proper installation and correct as necessary.<\/li>
  7. PS2\/2 I\/O check, sensor check