{"id":14540,"date":"2019-09-23T13:09:05","date_gmt":"2019-09-23T13:09:05","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=14540"},"modified":"2023-12-18T19:41:09","modified_gmt":"2023-12-18T19:41:09","slug":"c2650-bizhub-c3320i","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c2650-bizhub-c3320i","title":{"rendered":"C2650 (bizhub C3320i)"},"content":{"rendered":"\n

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.<\/strong><\/p>\n\n\n\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td>C2650: Main backup media access error<\/td><\/tr>
Rank<\/td>C<\/td><\/tr>
Trouble detection condition<\/td>-The error was found when reading out the data.
-The re-written data, which has been read out, checked and founded as error, is read out again and found as error.
-The error was found when reading out the counter value.
-The main body detects that the backup board is not mounted.<\/td><\/tr>
Trouble isolation<\/td>–<\/td><\/tr>
Relevant electrical parts<\/td>-Backup board (ERB)
-CPU board (CPUB)
-Base board (BASEB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

Procedure<\/h2>\n\n\n\n
  1. Check the connector between ERB CN1-BASEB CN20E for proper connection and correct as necessary.<\/li>
  2. Check CPUB for proper installation and correct as necessary.<\/li>
  3. Replace CPUB.<\/a> (Part# AAJRH01005)<\/li>
  4. Replace BASEB.<\/a> (Part# A93EH02007)<\/li>
  5. Replace ERB.<\/a> (Part# AA2JH00C00)<\/li>
  6. 1. Replace the current ERB with a new one.<\/li>
  7. 2. Replace the following components with new ones. <\/li>
  8. When the transfer belt unit, transfer roller and the fusing unit have been replaced with new ones, perform [Service Mode] -> [Counter] -> [Life] -> [New Release].