{"id":15820,"date":"2019-10-10T19:26:06","date_gmt":"2019-10-10T19:26:06","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=15820"},"modified":"2023-12-18T18:55:39","modified_gmt":"2023-12-18T18:55:39","slug":"c0210-bizhub-c554-c454","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c0210-bizhub-c554-c454","title":{"rendered":"C0210 (bizhub C554\/C454)"},"content":{"rendered":"\n

<\/p>\n\n\n\n

\n\nContents<\/p>\n\n\n\n
Trouble type<\/td>LCT lift failure<\/td><\/tr>
Trouble code<\/td>C0210<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Detection timing<\/td>-The main tray upper limit sensor (PS136) is not blocked even after the set period of time has elapsed after the paper lift-up operation for the drawer began.
-The shifter stop \/ lower limit position sensor (PS138) is not unblocked even after the set period of time has elapsed after the paper lift-up operation for the drawer began.
-The main tray upper limit sensor (PS136) is not blocked even after the set period of time has elapsed after the paper lift-up operating.
-The main tray upper limit sensor (PS136) is not unblocked even after the set period of time has elapsed after the paper lift-down operation began.
-The shifter stop \/ lower limit position sensor (PS138) is not blocked even after the set period of time has elapsed after the paper lift-down operation began.<\/td><\/tr>
Trouble isolation<\/td>LCT<\/td><\/tr>
Relevant electrical parts<\/td>-Main tray upper limit sensor (PS136)
-Shifter stop \/ lower limit position sensor (PS138)
-Elevator motor (M134)
-PC control board (PCCB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

(2)Procedure<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical components<\/td><\/tr><\/thead>
1<\/td>Check the connector between M134-PCCB CN10 for proper connection and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
2<\/td>Check the connector of M134 for proper drive coupling and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
3<\/td>Check the connector between PS136-relay CN1-PCCB CN4 for proper connection and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
4<\/td>Check the connector between PS138-relay CN16-PCCB CN14 for proper connection and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
5<\/td>PS136 I\/O check, sensor check<\/td>PCCB CN4-3 (ON)<\/td>PC-410 8-J<\/td><\/tr>
6<\/td>PS138 I\/O check, sensor check<\/td>PCCB CN14-6 (ON)<\/td>PC-410 4-J<\/td><\/tr>
7<\/td>M134 operation check<\/td>PCCB CN10-1 to 2<\/td>PC-410 6-J<\/td><\/tr>
8<\/td>Replace M134<\/a> (Part# A2XMM10100)<\/td>–<\/td>–<\/td><\/tr>
9<\/td>PCCB IC2 conduction check<\/td>–<\/td>–<\/td><\/tr>
10<\/td>Replace PCCB<\/a> (Part# A2XMH00301)<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n