{"id":15843,"date":"2019-10-11T14:15:49","date_gmt":"2019-10-11T14:15:49","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=15843"},"modified":"2023-12-18T18:55:39","modified_gmt":"2023-12-18T18:55:39","slug":"c1103-bizhub-c554-c454","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c1103-bizhub-c554-c454","title":{"rendered":"C1103 (bizhub C554\/C454)"},"content":{"rendered":"\n

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.<\/strong><\/p>\n\n\n\n

\n\nContents<\/p>\n\n\n\n
Trouble type<\/td>Alignment plate motor\/Fs malfunction<\/td><\/tr>
Trouble code<\/td>C1103<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Detection timing<\/td><When FS-533 is installed>
-The alignment plate home sensor\/F (PS108) is not unblocked after the set period of time has elapsed after the plate drive starts from the home position.
-The alignment plate home sensor\/F (PS108) is not blocked after the set period of time has elapsed after the alignment motor\/F (M105) is turned ON to return the plate to the home position. <\/td>		<\/td><\/tr>
<\/td><When FS-534 is installed>
-The alignment plate\/F home sensor (PS12) is not unblocked after the set period of time has elapsed after the plate drive starts from the home position.
-The alignment plate\/F home sensor (PS12) is not blocked after the set period of time has elapsed after the alignment motor\/front (M7) is turned ON to return the plate to the home position.
-The alignment plate\/F does not reach the specified position within the set period of time.<\/td><\/tr>
<\/td><When FS-535 is installed>
The alignment plate motor home sensor\/Fr (PS17) is not blocked even after the set period of time has elapsed while the alignment plate motor\/Fr (M11) is energized.<\/td><\/tr>
Trouble isolation<\/td>–<\/td><\/tr>
Relevant electrical parts<\/td><When FS-533 is installed>
-Alignment motor\/F (M105)
-Alignment plate home sensor\/F (PS108)
-FS control board (FSCB) <\/td>		<\/td><\/tr>
<\/td><When FS-534 is installed>
-Alignment motor\/Front (M7)
-Alignment plate\/F home sensor (PS12)
-FS control board (FSCB)<\/td><\/tr>
<\/td><When FS-535 is installed>
-Alignment plate motor\/Fr (M11)
-Alignment plate motor home sensor\/F (PS17)
-FS control board (FSCB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

(2)Procedure When FS-533 is installed<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical components<\/td><\/tr><\/thead>
1<\/td>Check the connector between M105-FSCB CN102 for proper connection and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
2<\/td>Check the connector of M105 for proper drive coupling and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
3<\/td>Check the connector between PS108-FSCB CN102 for proper connection and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
4<\/td>PS108 I\/O check, sensor check<\/td>FSCB CN102<\/td>FS-533 7-J<\/td><\/tr>
5<\/td>M105 operation check<\/td>FSCB CN102<\/td>FS-533 7-J<\/td><\/tr>
6<\/td>Replace M105<\/a> (Part# A2YUPPW600)<\/td>–<\/td>–<\/td><\/tr>
7<\/td>FSCB CP105 conduction check<\/td>–<\/td>–<\/td><\/tr>
8<\/td>Replace FSCB<\/a> (Part# A2YUPPH901(Model No. A2YU-WY1) or A2YUPPXN00 (Model No. A2YU-WY2))<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n