{"id":15861,"date":"2019-10-11T16:05:44","date_gmt":"2019-10-11T16:05:44","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=15861"},"modified":"2023-12-18T18:55:38","modified_gmt":"2023-12-18T18:55:38","slug":"c1114-bizhub-c554-c454","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c1114-bizhub-c554-c454","title":{"rendered":"C1114 (bizhub C554\/C454)"},"content":{"rendered":"\n

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.<\/strong><\/p>\n\n\n\n

\n\nContents<\/p>\n\n\n\n
Trouble type<\/td>Center-staple front adjust drive motor malfunction<\/td><\/tr>
Trouble code<\/td>C1114<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Detection timing<\/td><When FS-534+SD-511 is installed><When FS-535+SD-512 is installed>
The alignment home sensor (PS4) is not blocked or unblocked even after the set period of time has elapsed after the alignment motor (M3) is turned ON. <\/td>		<\/td><\/tr>
Trouble isolation<\/td>Half-Fold\/Tri-Fold Center Stapling<\/td><\/tr>
Relevant electrical parts<\/td><When FS-534+SD-511 is installed><When FS-535+SD-512 is installed>
-Alignment motor (M3)
-Alignment home sensor (PS4)
-SD drive board (SDDB)
-FS control board (FSCB)<\/td>		<\/td><\/tr><\/tbody><\/table>\n\n\n\n

(2)Procedure When FS-534+SD-511 is installed<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical components<\/td><\/tr><\/thead>
1<\/td>Check the connector between M3-relay CN10-SDDB J7 for proper connection and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
2<\/td>Check the connector of M3 for proper drive coupling, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
3<\/td>Check the connector between PS4-relay CN10-SDDB J7 for proper connection, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
4<\/td>PS4 I\/O check, sensor check<\/td>SDDB J7-6 (ON)<\/td>SD-511 6-F<\/td><\/tr>
5<\/td>M3 operation check<\/td>SDDB J7 7 to 10<\/td>SD-511 5-F to G<\/td><\/tr>
6<\/td>Replace M3<\/a> (Part# A3ERPP3N00)<\/td>–<\/td>–<\/td><\/tr>
7<\/td>Replace SDDB<\/a> (Part# A3ERPP6J03)<\/td>–<\/td>–<\/td><\/tr>
8<\/td>Replace FSCB<\/a> (Part# A3EPPPBE01)<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n