{"id":15897,"date":"2019-10-14T14:34:09","date_gmt":"2019-10-14T14:34:09","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=15897"},"modified":"2023-12-18T18:55:11","modified_gmt":"2023-12-18T18:55:11","slug":"c1144-bizhub-c554-c454","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c1144-bizhub-c554-c454","title":{"rendered":"C1144 (bizhub C554\/C454)"},"content":{"rendered":"\n

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.<\/strong><\/p>\n\n\n\n

\n\nContents<\/p>\n\n\n\n
Trouble type<\/td>Pre-eject drive motors malfunction <When FS-534 is installed><\/td><\/tr>
<\/td>Stacker plate drive motors malfunction <\/td><\/tr>
<\/td><\/tr>
Trouble code<\/td>C1144<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Detection timing<\/td><When FS-534 is installed>
-The pre-eject home sensor (PS21) is not blocked or unblocked even after the set period of time has elapsed after the pre-eject drive motor (M9) is turned ON.
-The pre-eject away sensor (PS22) is not blocked or unblocked even after the set period of time has elapsed after the pre-eject drive motor (M9) is turned ON. <\/td>		<\/td><\/tr>
<\/td><When FS-535 is installed>
The stacker plate home sensor (PS11) is not blocked or unblocked even after the set period of time has elapsed while the stacker plate drive motor (M17) is energized.<\/td><\/tr>
Trouble isolation<\/td>–<\/td><\/tr>
Relevant electrical parts<\/td><When FS-534 is installed>
-Pre-eject drive motor (M9)
-Pre-eject home sensor (PS21)
-Pre-eject away sensor (PS22)
-FS control board (FSCB)<\/td>		<\/td><\/tr>
<\/td><When FS-535 is installed>
-Stacker plate drive motor (M17)
-Stacker plate home sensor (PS11)
-FS control board (FSCB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

(2)Procedure When FS-534 is installed<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical components<\/td><\/tr><\/thead>
1<\/td>Check the connector between M9-relay CN7<A>-FSCB J13 for proper connection, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
2<\/td>Check the connector of M9 for proper drive coupling, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
3<\/td>Check the connector between PS21-relay CN8-relay CN7<B>-FSCB J12 for proper connection, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
4<\/td>Check the connector between PS22-relay CN8-relay CN7<B>-FSCB J12 for proper connection, and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
5<\/td>PS21 I\/O check, sensor check<\/td>FSCB J12-6 (ON)<\/td>FS-534 6-C<\/td><\/tr>
6<\/td>PS22 I\/O check, sensor check<\/td>FSCB J12-9 (ON)<\/td>FS-534 6-C<\/td><\/tr>
7<\/td>M9 operation check<\/td>FSCB J13-3 to 4<\/td>FS-534 8-C to D<\/td><\/tr>
8<\/td>Replace M9<\/a> (Part# A87GPP1500)<\/td>–<\/td>–<\/td><\/tr>
9<\/td>Replace FSCB<\/a> (Part# A3EPPPBE01)<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n