{"id":16083,"date":"2019-10-15T13:17:26","date_gmt":"2019-10-15T13:17:26","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=16083"},"modified":"2023-12-18T16:17:20","modified_gmt":"2023-12-18T16:17:20","slug":"c6102-bizhub-c554-c454","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c6102-bizhub-c554-c454","title":{"rendered":"C6102 (bizhub C554\/C454)"},"content":{"rendered":"\n

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.<\/strong><\/p>\n\n\n\n

\n\nContents<\/p>\n\n\n\n
Trouble type<\/td>Drive system home sensor malfunction<\/td><\/tr>
Trouble code<\/td>C6102<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Detection timing<\/td>-The scanner home sensor (PS201) is unable to detect the scanner located at its home position.
-The scanner home sensor (PS201) is unable to detect a scanner even when the scanner motor has been driven to move the scanner over the maximum travelling distance.
-The scanner home sensor (PS201) detects the scanner when the scanner has moved the maximum travelling distance from the position, at which it blocks the scanner home sensor (PS201).<\/td><\/tr>
Trouble isolation<\/td>Scanner<\/td><\/tr>
Relevant electrical parts<\/td>-Scanner home sensor (PS201)
-Scanner motor (M201)
-Scanner drive board (SCDB)
-Printer control board (PRCB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

(2)Procedure<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical components<\/td><\/tr><\/thead>
1<\/td>Correct or change the scanner drive (pulley, gear, belt) if it is faulty.<\/td>–<\/td>–<\/td><\/tr>
2<\/td>Correct the scanner motor set screw if loose.<\/td>–<\/td>–<\/td><\/tr>
3<\/td>Adjust [Image Position Leading Edge] and [Feed Direction Adjustment].<\/td>–<\/td>–<\/td><\/tr>
4<\/td>Check the connector between M201-SCDB PJ4 for proper connection and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
5<\/td>Check the connector between PS201-SCDB PJ6 for proper connection and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
6<\/td>Check the connector between SCDB PJ2-PRCB CN43 for proper connection and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
7<\/td>PS201 I\/O check, sensor check<\/td>SCDB PJ6-3 (ON)<\/td>27-P<\/td><\/tr>
8<\/td>M201 operation check<\/td>SCDB PJ4-1 to 4<\/td>27-P<\/td><\/tr>
9<\/td>Replace SCDB<\/a> (Part# A161H01A00Old or A161H01B12)<\/td>–<\/td>–<\/td><\/tr>
10<\/td>Replace PRCB<\/a> (C554 Part# A2XKH00104 \/ C454 A4FJH00104)<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n