{"id":16388,"date":"2019-10-16T13:55:43","date_gmt":"2019-10-16T13:55:43","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=16388"},"modified":"2023-12-18T15:10:07","modified_gmt":"2023-12-18T15:10:07","slug":"30-03-bizhub-c554-c454","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=30-03-bizhub-c554-c454","title":{"rendered":"30-03 (bizhub C554\/C454)"},"content":{"rendered":"\n

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.<\/strong><\/p>\n\n\n\n

\n\nContents<\/p>\n\n\n\n
JAM type<\/td>Misfeed at image 2nd transfer section<\/td><\/tr>
JAM code<\/td>30-03<\/td><\/tr>
Detection timing<\/td>The leading edge of paper does not block the paper exit sensor (PS3) since the paper feeding is started.<\/td><\/td><\/tr>
–<\/td>The registration sensor (PS1) is unblocked when the main power switch is turned ON, a door or cover is opened and closed, or a misfeed or malfunction is reset.<\/td><\/tr>
–<\/td>The paper exit sensor (PS3) is unblocked when the main power switch is turned ON, a door or cover is opened and closed, or a misfeed or malfunction is reset.<\/td><\/tr>
–<\/td>In case paper position is detected as locating properly after main power switch is turned ON, door and cover are opened \/ closed or jam\/trouble reset is done, it is regarded as paper jam at image transfer section.<\/td><\/tr>
Misfeed processing location<\/td>Right door<\/td><\/tr>
Relevant parts<\/td>-Transport motor (M1)
-Registration motor (M24)
-Paper exit clutch (CL8)
-Registration sensor (PS1)
-Paper exit sensor (PS3)
-Front side board (FRB)
-Expansion control board (EXCB)
-Printer control board (PRCB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

(2)Procedure<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical component<\/td><\/tr><\/thead>
1<\/td>Initial check items<\/a><\/td>–<\/td>–<\/td><\/tr>
2<\/td>PS1 I\/O check, sensor check<\/td>FRB CN8-3 (ON)<\/td>3-L<\/td><\/tr>
3<\/td>PS3 I\/O check, sensor check<\/td>PRCB CN21-7 (ON)<\/td>15-C<\/td><\/tr>
4<\/td>CL8 operation check<\/td>PRCB CN13-16 (ON)<\/td>bizhub C554 24-Cbizhub C454 22-C<\/td><\/tr>
5<\/td>M1 operation check<\/td>PRCB CN31-2 (REM)PRCB CN31-5 (LOCK)<\/td>bizhub C554 18-Jbizhub C454 16-J<\/td><\/tr>
6<\/td>M24 operation check<\/td>EXCB CN3-1 to 4<\/td>21-P<\/td><\/tr>
7<\/td>Replace FRB<\/a> (Part# A161H00501)<\/td>–<\/td>–<\/td><\/tr>
8<\/td>EXCB IC5 conduction check<\/td>–<\/td>–<\/td><\/tr>
9<\/td>Replace EXCB<\/a> (Part# A2XKH00502)<\/td>–<\/td>–<\/td><\/tr>
10<\/td>Replace PRCB<\/a> (C554 Part# A2XKH00104 \/ C454 Part# A4FJH00104)<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n