{"id":16561,"date":"2019-10-17T14:42:22","date_gmt":"2019-10-17T14:42:22","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=16561"},"modified":"2023-12-18T15:04:46","modified_gmt":"2023-12-18T15:04:46","slug":"c1109-bizhub-c364-c284-c224","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c1109-bizhub-c364-c284-c224","title":{"rendered":"C1109 (bizhub C364\/C284\/C224)"},"content":{"rendered":"\n

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.<\/strong><\/p>\n\n\n\n

\n\nContents<\/p>\n\n\n\n
Trouble type<\/td>Stapler motors drive malfunction<\/td><\/tr>
Trouble code<\/td>C1109<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Detection timing<\/td><When FS-533 is installed>
The stapler home sensor (PS110) is not blocked even after the set period of time has elapsed after the stapler motor turned ON. <\/td>		<\/td><\/tr>
<\/td><When FS-534 is installed>
-The stapler home position sensor (Rear) (PS23) is not blocked or unblocked even after the set period of time has elapsed after the stapler motor (M14) turned ON.
-The stapler position sensor (Center) (PS24) is blocked, when the stapler motor (M14) is running.<\/td><\/tr>
Trouble isolation<\/td>Staple<\/td><\/tr>
Relevant electrical parts<\/td><When FS-533 is installed>
-Stapler home sensor (PS110)
-Stapler unit
-Stapler relay board (STREYB)
-FS control board (FSCB) <\/td>		<\/td><\/tr>
<\/td><When FS-534 is installed>
-Stapler home position sensor (Rear) (PS23)
-Stapler unitStapler position sensor (Center) (PS24)
-FS control board (FSCB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

(2)Procedure When FS-533 is installed<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical components<\/td><\/tr><\/thead>
1<\/td>Check the connector between the stapler unit-STREYB CN122 and CN123 for proper connection and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
2<\/td>Check the connector of the stapler unit for proper drive coupling and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
3<\/td>Check the connector between PS110-FSCB CN110 for proper connection and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
4<\/td>PS110 I\/O check, sensor check<\/td>FSCB CN110<\/td>FS-533 8-D to E<\/td><\/tr>
5<\/td>Replace the stapler unit<\/a> (Part# A2YUPPK401)<\/td>–<\/td>–<\/td><\/tr>
6<\/td>Replace STREYB<\/a> (Part# A2YUPPG700)<\/td>–<\/td>–<\/td><\/tr>
7<\/td>Replace FSCB<\/a> (Part# A2YUPPH901(Model No. A2YU-WY1) or A2YUPPXN00 (Model No. A2YU-WY2))<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n