{"id":16563,"date":"2019-10-17T14:47:22","date_gmt":"2019-10-17T14:47:22","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=16563"},"modified":"2023-12-18T15:04:46","modified_gmt":"2023-12-18T15:04:46","slug":"c1112-bizhub-c364-c284-c224","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c1112-bizhub-c364-c284-c224","title":{"rendered":"C1112 (bizhub C364\/C284\/C224)"},"content":{"rendered":"\n

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.<\/strong><\/p>\n\n\n\n

\n\nContents<\/p>\n\n\n\n
Trouble type<\/td>Stapler motors malfunction<\/td><\/tr>
Trouble code<\/td>C1112<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Detection timing<\/td><When FS-534+SD-511 is installed>
-The stapler home sensor is not turned ON even after the set period of time has elapsed while the stapler motor is energized.
-The stapler home sensor is not turned OFF even after the set period of time has elapsed after the stapler home sensor is turned ON.<\/td>		<\/td><\/tr>
Trouble isolation<\/td>-Staple
-Half-Fold\/Tri-Fold Center Stapling<\/td><\/tr>
Relevant electrical parts<\/td>-Staple unit
-SD drive board (SDDB)
-FS control board (FSCB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

(2)Procedure<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical components<\/td><\/tr><\/thead>
1<\/td>Check the connector between the staple unit-SDDB J4 for proper connection and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
2<\/td>Check the connector of the staple unit for proper drive coupling and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
3<\/td>Replace the staple unit<\/a> (Part# A3ER929300)<\/td>–<\/td>–<\/td><\/tr>
4<\/td>Replace SDDB<\/a> (Part# A3ERPP6J03)<\/td>–<\/td>–<\/td><\/tr>
5<\/td>Replace FSCB<\/a> (Part# A3EPPPBE01)<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n