{"id":16573,"date":"2019-10-17T15:08:50","date_gmt":"2019-10-17T15:08:50","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=16573"},"modified":"2023-12-18T15:04:46","modified_gmt":"2023-12-18T15:04:46","slug":"c1140-bizhub-c364-c284-c224","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c1140-bizhub-c364-c284-c224","title":{"rendered":"C1140 (bizhub C364\/C284\/C224)"},"content":{"rendered":"\n

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.<\/strong><\/p>\n\n\n\n

\n\nContents<\/p>\n\n\n\n
Trouble type<\/td>Alignment plate motor\/Rrs malfunction<\/td><\/tr>
Trouble code<\/td>C1140<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Detection timing<\/td><When FS-533 is installed>
-The alignment plate home sensor\/R (PS109) is not unblocked after the set period of time has elapsed after the plate drive starts from the home position.
-The alignment plate home sensor\/R (PS109) is not blocked after the set period of time has elapsed when the plate returns to the home position.<\/td>		<\/td><\/tr>
<\/td><When FS-534 is installed>
The alignment plate\/R home sensor (PS13) is not blocked or unblocked even after the set period of time has elapsed while the alignment motor\/Rr (M8) is energized.<\/td><\/tr>
Trouble isolation<\/td>–<\/td><\/tr>
Relevant electrical parts<\/td><When FS-533 is installed>
-Alignment motor\/R (M106)
-Alignment plate home sensor\/R (PS109)
-FS control board (FSCB)<\/td>		<\/td><\/tr>
<\/td><When FS-534 is installed>
-Alignment motor\/Rear (M8)
-Alignment plate\/R home sensor (PS13)
-FS control board (FSCB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

(2)Procedure When FS-533 is installed<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical components<\/td><\/tr><\/thead>
1<\/td>Check the connector between M106-FSCB CN102 for proper connection and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
2<\/td>Check the connector of M106 for proper drive coupling and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
3<\/td>Check the connector between PS109-relay CN106-FSCB CN102 for proper connection and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
4<\/td>PS109 I\/O check, sensor check<\/td>FSCB CN102<\/td>FS-533 7-J<\/td><\/tr>
5<\/td>M106 operation check<\/td>FSCB CN102<\/td>FS-533 8-J<\/td><\/tr>
6<\/td>Replace M106<\/a> (Part# A2YUPPW600)<\/td>–<\/td>–<\/td><\/tr>
7<\/td>FSCB CP105 conduction check<\/td>–<\/td>–<\/td><\/tr>
8<\/td>Replace FSCB<\/a> (Part# A2YUPPH901(Model No. A2YU-WY1) or A2YUPPXN00 (Model No. A2YU-WY2))<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n