{"id":16603,"date":"2019-10-17T16:02:06","date_gmt":"2019-10-17T16:02:06","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=16603"},"modified":"2023-12-18T15:04:04","modified_gmt":"2023-12-18T15:04:04","slug":"c2152-bizhub-c364-c284-c224","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c2152-bizhub-c364-c284-c224","title":{"rendered":"C2152 (bizhub C364\/C284\/C224)"},"content":{"rendered":"\n

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.<\/strong><\/p>\n\n\n\n

\n\nContents<\/p>\n\n\n\n
Trouble type<\/td>Transfer belt pressure welding alienation<\/td><\/tr>
Trouble code<\/td>C2152<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Detection timing<\/td>-The 1st transfer pressure sensor (PS39) does not detect switch from retraction to pressure within a given period time after 1st transfer pressure clutch (CL5) has stared engagement.
-The 1st transfer pressure sensor (PS39) is unblocked after the laps of given time after the 1st transfer pressure clutch (CL5) turned OFF when the pressing operation is finished.
-The 1st transfer pressure sensor (PS39) does not detect \u00e2??switch from pressure to retraction within a given period time after 1st transfer pressure clutch (CL5) has stared engagement.
-The 1st transfer pressure sensor (PS39) is blocked after the lamps of given time after the 1st transfer pressure clutch (CL5) turned OFF when the release operation is finished.<\/td><\/tr>
Trouble isolation<\/td>–<\/td><\/tr>
Relevant electrical parts<\/td>-Fusing motor (M3)
-1st transfer pressure clutch (CL5)
-1st transfer pressure sensor (PS39)
-Printer control board (PRCB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

(2)Procedure<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical components<\/td><\/tr><\/thead>
1<\/td>Check the connector between M3-PRCB CN2 for proper connection and correct as necessary<\/td>–<\/td>–<\/td><\/tr>
2<\/td>Check the connector of M3 for proper drive coupling and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
3<\/td>Check the connector between PS39-relay CN113-PRCB CN13 for proper connection and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
4<\/td>Check the connector between CL5-relay CN118-PRCB CN13 for proper connection and correct as necessary.<\/td>–<\/td>–<\/td><\/tr>
5<\/td>PS39 I\/O check, sensor check<\/td>PRCB CN13-7 (ON)<\/td>24-C<\/td><\/tr>
6<\/td>CL5 operation check<\/td>PRCB CN13-14 (ON)<\/td>23 to 24-C<\/td><\/tr>
7<\/td>M3 operation check<\/td>PRCB CN2-9 (REM)PRCB CN2-12 (LOCK)<\/td>27-I to J<\/td><\/tr>
8<\/td>Replace M3<\/a> (Part# A161M10200)<\/td>–<\/td>–<\/td><\/tr>
9<\/td>PRCB ICP3 conduction check<\/td>–<\/td>–<\/td><\/tr>
10<\/td>Replace PRCB<\/a> (Part# A161H00108)<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n