{"id":17114,"date":"2019-10-21T15:24:30","date_gmt":"2019-10-21T15:24:30","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=17114"},"modified":"2023-12-18T14:58:21","modified_gmt":"2023-12-18T14:58:21","slug":"93-10-bizhub-c364-c284-c224","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=93-10-bizhub-c364-c284-c224","title":{"rendered":"93-10 (bizhub C364\/C284\/C224)"},"content":{"rendered":"\n

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.<\/strong><\/p>\n\n\n\n

\n\nContents<\/p>\n\n\n\n
JAM type<\/td>Misfeed at duplex transport section<\/td><\/tr>
JAM code<\/td>93-10<\/td><\/tr>
Detection timing<\/td>The ADU paper passage sensor\/2 (PS41) is not blocked even after the set period of time has elapsed after the ADU paper passage sensor\/1 (PS40) is unblocked by the paper.<\/td><\/td><\/tr>
–<\/td>In case the ADU paper passage sensor\/1 (PS40) is unblocked or the ADU paper passage sensor\/2 (PS41) is blocked after main power switch is turned ON, door and cover are opened \/ closed or jam\/trouble reset is done, it is regarded as paper jam at duplex transport section.<\/td><\/tr>
–<\/td>In case the registration sensor (PS1) is unblocked after main power switch is turned ON, door and cover are opened \/ closed or jam\/trouble reset is done, it is regarded as paper jam at duplex transport section.<\/td><\/tr>
–<\/td>In case paper position is detected as locating properly after main power switch is turned ON, door and cover are opened \/ closed or jam\/trouble reset is done, it is regarded as paper jam at duplex transport section.<\/td><\/tr>
Misfeed processing location<\/td>Duplex door<\/td><\/tr>
Relevant parts<\/td>-Transport motor (M1)
-ADU transport motor (M5)
-ADU transport clutch (CL6)
-Registration sensor (PS1)
-ADU paper passage sensor\/1 (PS40)
-ADU paper passage sensor\/2 (PS41)
-Front side board (FRB)
-Printer control board (PRCB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

(2)Procedure<\/p>\n\n\n\n
Step<\/td>Action<\/td>Control signal<\/td>Location of electrical component<\/td><\/tr><\/thead>
1<\/td>Initial check items<\/a><\/td>–<\/td>–<\/td><\/tr>
2<\/td>PS1 I\/O check, sensor check<\/td>FRB CN8-3 (ON)<\/td>4 to 5-L<\/td><\/tr>
3<\/td>PS40 I\/O check, sensor check<\/td>PRCB CN21-10 (ON)<\/td>18-C<\/td><\/tr>
4<\/td>PS41 I\/O check, sensor check<\/td>PRCB CN21-13 (ON)<\/td>18-C<\/td><\/tr>
5<\/td>CL6 operation check<\/td>FRB CN12-11 (ON)<\/td>26-C<\/td><\/tr>
6<\/td>M1 operation check<\/td>PRCB CN31-2 (REM)PRCB CN31-5 (LOCK)<\/td>bizhub C364 21-Jbizhub C284 22-Jbizhub C224 24-J<\/td><\/tr>
7<\/td>M5 operation check<\/td>PRCB CN21-1 to 4<\/td>17 to 18-C<\/td><\/tr>
8<\/td>PRCB ICP31, IC27 conduction check<\/td>–<\/td>–<\/td><\/tr>
9<\/td>Replace FRB<\/a> (Part# A161H00501)<\/td>–<\/td>–<\/td><\/tr>
10<\/td>Replace PRCB<\/a> (Part# A161H00108)<\/td>–<\/td>–<\/td><\/tr><\/tbody><\/table>\n\n\n\n