{"id":17177,"date":"2019-10-22T13:04:45","date_gmt":"2019-10-22T13:04:45","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=17177"},"modified":"2023-12-18T14:56:49","modified_gmt":"2023-12-18T14:56:49","slug":"c1114-bizhub-c759-c659","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c1114-bizhub-c759-c659","title":{"rendered":"C1114 (bizhub C759\/C659)"},"content":{"rendered":"\n

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.<\/strong><\/p>\n\n\n\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td>C1114: Alignment motor malfunction<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Trouble detection condition<\/td><When FS-536SD or FS-537SD is installed>
The alignment home sensor (PS4) is not turned OFF (unblocked) or ON (blocked) even after the set period of time has elapsed after the alignment motor (M3) is turned ON.<\/td>		<\/td><\/tr>
Trouble isolation<\/td>Center Stapling\/Half-Fold\/Tri-Fold<\/td><\/tr>
Relevant electrical parts<\/td><When FS-536SD or FS-537SD is installed>
-Alignment motor (M3)
-Alignment home sensor (PS4)
-SD control board (SDCB)
-FS control board (FSCB)<\/td>		<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 Procedure<\/h2>\n\n\n\n
  1. Check the connector between M3-relay CN26 (FS-536SD), CN29 (FS-537SD)-SDCB J7 for proper connection and correct as necessary.<\/li>
  2. Check the connector of M3 for proper drive coupling and correct as necessary.<\/li>
  3. Check the connector between PS4-relay CN26 (FS-536SD), CN29 (FS-537SD)-SDCB J7 for proper connection and correct as necessary.<\/li>
  4. PS4 I\/O check, sensor check