{"id":17193,"date":"2019-10-22T14:05:44","date_gmt":"2019-10-22T14:05:44","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=17193"},"modified":"2023-12-18T14:56:25","modified_gmt":"2023-12-18T14:56:25","slug":"c1132-bizhub-c759-c659","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c1132-bizhub-c759-c659","title":{"rendered":"C1132 (bizhub C759\/C659)"},"content":{"rendered":"\n

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.<\/strong><\/p>\n\n\n\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td>C1132: Punch drive motor drive malfunction<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Trouble detection condition<\/td><When FS-536+PK-520 or FS-536SD+PK-520 is installed>
The punch home sensor (PS1) is not turned ON (unblocked) or OFF (blocked) even after the set period of time has elapsed while the punch drive motor (M1) is energized.<\/td>		<\/td><\/tr>
<\/td><When FS-537+PK-523 or FS-537SD+PK-523 is installed>
The PK punch home sensor\/2 (PS301) is not turned ON (unblocked) or OFF (blocked) even after the set period of time has elapsed while the punch drive motor (M301) is energized.<\/td><\/tr>
Trouble isolation<\/td>–<\/td><\/tr>
Relevant electrical parts<\/td><When FS-536+PK-520 or FS-536SD+PK-520 is installed>
-Punch drive motor (M1)
-Punch home sensor (PS1)
-FS control board (FSCB)<\/td>		<\/td><\/tr>
<\/td><When FS-537+PK-523 or FS-537SD+PK-523 is installed>
-Punch drive motor (M301)
-PK punch home sensor\/2 (PS301)
-Punch control board (PKCB)
-FS control board (FSCB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 Procedure<\/h2>\n\n\n\n

 When FS-536+PK-520 or FS-536SD+PK-520 is installed<\/h2>\n\n\n\n
  1. Check the connector between M1-relay CN351-FSCB J7 for proper connection and correct as necessary.<\/li>
  2. Check the connector of M1 for proper drive coupling and correct as necessary.<\/li>
  3. Check the connector between PS1-FSCB J7 for proper connection and correct as necessary.<\/li>
  4. PS1 I\/O check, sensor check