{"id":17980,"date":"2019-10-28T14:13:44","date_gmt":"2019-10-28T14:13:44","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=17980"},"modified":"2023-12-18T14:41:30","modified_gmt":"2023-12-18T14:41:30","slug":"c0211-bizhub-c287-c227","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c0211-bizhub-c287-c227","title":{"rendered":"C0211 (bizhub C287\/C227)"},"content":{"rendered":"\n

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.<\/strong><\/p>\n\n\n\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td>C0211: Manual feed up\/down abnormality<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Trouble detection condition<\/td>-Paper is not turned OFF (unblock) the bypass lift-up position sensor (PS26) even after the transport motor (M1) rotates for a given period of time after the position is switched from stand by position at lift-up plate to the feed position.
-The bypass lift-up position sensor (PS26) is not turned ON (blocked) even after the transport motor (M1) rotates for a given period of time after the position is switched from stand by position at lift-up plate to the feed position.<\/td><\/tr>
Trouble isolation<\/td>Manual<\/td><\/tr>
Relevant electrical parts<\/td>-Transport motor (M1)
-Bypass pick-up solenoid (SD1)
-Bypass lift-up position sensor (PS26)
-MFP board (MFPB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 Procedure<\/h2>\n\n\n\n
  1. Check the connector between M1-MFPB CN11E for proper connection and correct as necessary.<\/li>
  2. Check the connector of M1 for proper drive coupling and correct as necessary.<\/li>
  3. Check the connector between PS26-relay CN50-MFPB CN30E for proper connection and correct as necessary.<\/li>
  4. Check the connector between SD1-relay CN123-relay CN50-MFPB CN30E for proper connection and correct as necessary.<\/li>
  5. PS26 I\/O check, sensor check