{"id":17982,"date":"2019-10-28T14:16:29","date_gmt":"2019-10-28T14:16:29","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=17982"},"modified":"2023-12-18T14:41:30","modified_gmt":"2023-12-18T14:41:30","slug":"c0214-bizhub-c287-c227","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c0214-bizhub-c287-c227","title":{"rendered":"C0214 (bizhub C287\/C227)"},"content":{"rendered":"\n

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.<\/strong><\/p>\n\n\n\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td>C0214: LCT shift failure (When PC-414 is installed)<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Trouble detection condition<\/td>-When the paper removal method and the correct paper setting method are displayed on the operation panel three times.
-The shifter stop \/ lower limit position sensor (PS138) is not turned ON (blocked) even after the set period of time has elapsed after the shift operation began (shift to the right).
-The shifter home sensor (PS139) is not turned OFF (unblocked) even after the set period of time has elapsed after the shift operation began (shift to the right).
-The shifter stop \/ lower limit position sensor (PS138) is not turned OFF (unblocked) even after the set period of time has elapsed after the return operation began (shift to the left).
-The shifter home sensor (PS139) is not turned ON (blocked) even after the set period of time has elapsed after the return operation began (shift to the left).<\/td><\/tr>
Trouble isolation<\/td>Tray 3<\/td><\/tr>
Relevant electrical parts<\/td>-Shifter stop \/ lower limit position sensor (PS138)
-Shifter home sensor (PS139)
-Shifter motor (M133)
-PC control board (PCCB)
-MFP board (MFPB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 Procedure<\/h2>\n\n\n\n
  1. Check the paper for proper set and correct as necessary.<\/li>
  2. Remove the tray and check to see if a piece of paper is not left inside the machine.<\/li>
  3. Check the connector between M133-PCCB CN10L for proper connection and correct as necessary.<\/li>
  4. Check the connector of M133 for proper drive coupling and correct as necessary.<\/li>
  5. Check the connector between PS138-relay CN16-PCCB CN14L for proper connection and correct as necessary.<\/li>
  6. Check the connector between PS139-relay CN16-PCCB CN14L for proper connection and correct as necessary.<\/li>
  7. PS138 I\/O check, sensor check