{"id":18010,"date":"2019-10-28T15:09:29","date_gmt":"2019-10-28T15:09:29","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=18010"},"modified":"2023-12-18T14:41:12","modified_gmt":"2023-12-18T14:41:12","slug":"c1140-bizhub-c287-c227","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c1140-bizhub-c287-c227","title":{"rendered":"C1140 (bizhub C287\/C227)"},"content":{"rendered":"\n

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.<\/strong><\/p>\n\n\n\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td>C1140: Alignment plate motor\/Rr malfunction (When FS-533, FS-534 or FS-534SD is installed)<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Trouble detection condition<\/td><When FS-533 is installed>
-The alignment plate home sensor\/R (PS109) is not turned OFF (unblocked) after the set period of time has elapsed after the plate drive starts from the home position.
-The alignment plate home sensor\/R (PS109) is not turned ON (blocked) after the set period of time has elapsed while the alignment motor\/R (M106) is energized when the plate returns to the home position.<\/td><\/tr>
<\/td><When FS-534 or FS-534SD is installed>
-The alignment plate\/R home sensor (PS13) is not turned ON (blocked) or OFF (unblocked) even after the set period of time has elapsed while the alignment motor\/Rear (M8) is energized.<\/td><\/tr>
Trouble isolation<\/td>–<\/td><\/tr>
Relevant electrical parts<\/td><When FS-533 is installed>
-Alignment motor\/R (M106)
-Alignment plate home sensor\/R (PS109)
-FS control board (FSCB)<\/td><\/tr>
<\/td><When FS-534 or FS-534SD is installed>
-Alignment motor\/Rear (M8)
-Alignment plate\/R home sensor (PS13)
-FS control board (FSCB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 Procedure<\/h2>\n\n\n\n

 When FS-533 is installed<\/h2>\n\n\n\n
  1. Check the connector between M106-FSCB CN102 for proper connection and correct as necessary.<\/li>
  2. Check the connector of M106 for proper drive coupling and correct as necessary.<\/li>
  3. Check the connector between PS109-FSCB CN102 for proper connection and correct as necessary.<\/li>
  4. PS109 I\/O check, sensor check