{"id":18048,"date":"2019-10-28T15:54:19","date_gmt":"2019-10-28T15:54:19","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=18048"},"modified":"2023-12-18T14:38:43","modified_gmt":"2023-12-18T14:38:43","slug":"c2155-bizhub-c287-c227","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c2155-bizhub-c287-c227","title":{"rendered":"C2155 (bizhub C287\/C227)"},"content":{"rendered":"\n

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.<\/strong><\/p>\n\n\n\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td>C2155: Transfer belt contact fault after K pressure established<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Trouble detection condition<\/td>The 1st transfer pressure sensor (PS39) is blocked after the lamps of given time after the 1st transfer pressure clutch (CL5) turned OFF when the release operation is finished.<\/td><\/tr>
Trouble isolation<\/td>\u2013<\/td><\/tr>
Relevant electrical parts<\/td>-Fusing motor (M3)
-1st transfer pressure clutch (CL5)
-1st transfer pressure sensor (PS39)
-MFP board (MFPB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 Procedure<\/h2>\n\n\n\n
  1. Check the connector between M3-MFPB CN11E for proper connection and correct as necessary.<\/li>
  2. Check the connector of M3 for proper drive coupling and correct as necessary.<\/li>
  3. Check the connector between PS39-relay CN24-MFPB CN7E for proper connection and correct as necessary.<\/li>
  4. Check the connector between CL5-relay CN29-MFPB CN12E for proper connection and correct as necessary.<\/li>
  5. PS39 I\/O check, sensor check