{"id":18192,"date":"2019-10-29T12:04:28","date_gmt":"2019-10-29T12:04:28","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=18192"},"modified":"2023-12-18T14:37:20","modified_gmt":"2023-12-18T14:37:20","slug":"c6103-bizhub-c287-c227","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c6103-bizhub-c287-c227","title":{"rendered":"C6103 (bizhub C287\/C227)"},"content":{"rendered":"\n

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.<\/strong><\/p>\n\n\n\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td>C6103: Slider over running<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Trouble detection condition<\/td>The scanner home sensor (PS201) detects the scanner at its home position during a period of time that begins with the time when a prescan command and a scan preparation command are executed and ends when a home return command is executed.<\/td><\/tr>
Trouble isolation<\/td>Scanner<\/td><\/tr>
Relevant electrical parts<\/td>-Scanner home sensor (PS201)
-Scanner motor (M201)
-MFP board (MFPB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 Procedure<\/h2>\n\n\n\n
  1. Correct or change the scanner drive (pulley, gear, belt) if it is faulty.<\/li>
  2. Correct the scanner motor set screw if loose.<\/li>
  3. Adjust [Image Position: Leading Edge] and [Sub Scan Zoom Adj.].<\/li>
  4. Check the connector between M201-relay CN151-MFPB CN25E for proper connection and correct as necessary.<\/li>
  5. Check the connector between PS201-MFPB CN21E for proper connection and correct as necessary.<\/li>
  6. PS201 I\/O check, sensor check