{"id":1842,"date":"2019-05-13T18:31:05","date_gmt":"2019-05-13T18:31:05","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=1842"},"modified":"2023-12-27T17:00:16","modified_gmt":"2023-12-27T17:00:16","slug":"c2156-bizhub-c368-c308-c258","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c2156-bizhub-c368-c308-c258","title":{"rendered":"C2156 (bizhub C368\/C308\/C258)"},"content":{"rendered":"\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td>\u2022 C2156: Transfer belt spacing fault after all pressure established
<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Trouble detection condition<\/td>The 1st transfer pressure sensor (PS39) is unblocked after the laps of given time after the 1st transfer pressure clutch (CL5) turned OFF when the pressing operation is finished.
<\/td><\/tr>
Trouble isolation<\/td>\u2013<\/td><\/tr>
Relevant electrical parts<\/td>\u2022 Fusing motor (M3)\u00a0
\u2022 1st transfer pressure clutch (CL5)\u00a0
\u2022 1st transfer pressure sensor (PS39)\u00a0
\u2022 MFP board (MFPB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 Procedure<\/h2>\n\n\n\n
  1. Check the connector between M3-MFPB CN8E for proper connection and correct as necessary.<\/li>
  2. Check the connector of M3 for proper drive coupling and correct as necessary.<\/li>
  3. Check the connector between PS39-relay CN113-MFPB CN15EB for proper connection and correct as necessary.<\/li>
  4. Check the connector between CL5-relay CN118-MFPB CN15EA for proper connection and correct as necessary.<\/li>
  5. PS39 I\/O check, sensor check