{"id":18619,"date":"2019-10-31T18:16:40","date_gmt":"2019-10-31T18:16:40","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=18619"},"modified":"2023-12-18T14:30:48","modified_gmt":"2023-12-18T14:30:48","slug":"c0208-bizhub-287-227","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c0208-bizhub-287-227","title":{"rendered":"C0208 (bizhub 287\/227)"},"content":{"rendered":"\n

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.<\/strong><\/p>\n\n\n\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td>C0208: Tray 4 lift-up failure (When PC-213 is installed)<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Trouble detection condition<\/td>The tray 4 upper limit sensor (PS126) is not turned ON (blocked) even after the set period of time has elapsed after the paper lift-up operation for the drawer began.<\/td><\/tr>
Trouble isolation<\/td>Tray 4<\/td><\/tr>
Relevant electrical parts<\/td>-Tray 4 lift-up motor (M123)
-Tray 4 upper limit sensor (PS126)
-PC control board (PCCB)
-MFP board (MFPB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

 Procedure<\/h2>\n\n\n\n
  1. Check the connector between M123-PCCB CN8 for proper connection and correct as necessary.<\/li>
  2. Check the connector of M123 for proper drive coupling and correct as necessary.<\/li>
  3. Check the connector between PS126-relay CN47-PCCB CN7 for proper connection and correct as necessary.<\/li>
  4. PS126 I\/O check, sensor check