{"id":19252,"date":"2020-02-21T16:09:31","date_gmt":"2020-02-21T16:09:31","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=19252"},"modified":"2023-12-18T14:24:42","modified_gmt":"2023-12-18T14:24:42","slug":"c0204-bizhub-c650i-c550i-c450i","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c0204-bizhub-c650i-c550i-c450i","title":{"rendered":"C0204 (bizhub C650i\/C550i\/C450i)"},"content":{"rendered":"\n

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.<\/strong><\/p>\n\n\n\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td>C0204: Tray 2 feeder up\/down abnormality<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Trouble detection condition<\/td>The tray 2 upper limit sensor (PS22) is not turned ON (blocked) even after the set period of time has elapsed after the paper lift-up operation for the drawer began.<\/td><\/tr>
Trouble isolation<\/td>Tray 2<\/td><\/tr>
Relevant electrical parts<\/td>-Tray 2 lift-up motor (M13)
-Tray 2 upper limit sensor (PS22)
-CPU board (CPUB)
-Base board (BASEB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

Procedure<\/h2>\n\n\n\n
  1. Remove the tray<\/a>\u00a0and check to see if a piece of paper is not left inside the machine.<\/li>
  2. Check the connector between M13-relay CN181-BASEB CN25E for proper connection and correct as necessary.<\/li>
  3. Check the connector of M13 for proper drive coupling and correct as necessary.<\/li>
  4. Check the connector between PS22-relay CN40-BASEB CN23E for proper connection and correct as necessary.<\/li>
  5. Check CPUB for proper installation and correct as necessary.<\/li>
  6. PS22 I\/O check, sensor check