{"id":19264,"date":"2020-02-21T16:55:04","date_gmt":"2020-02-21T16:55:04","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=19264"},"modified":"2023-12-18T14:24:42","modified_gmt":"2023-12-18T14:24:42","slug":"c0216-bizhub-c650i-c550i-c450i","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c0216-bizhub-c650i-c550i-c450i","title":{"rendered":"C0216 (bizhub C650i\/C550i\/C450i)"},"content":{"rendered":"\n

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.<\/strong><\/p>\n\n\n\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td>C0216: External LCT up\/down abnormality (When LU-207 or LU-302 is installed)<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Trouble detection condition<\/td>The LU upper limit sensor (PS2) is not turned ON (blocked) even after the set period of time has elapsed after the paper lift-up operation for the drawer began.<\/td><\/tr>
Trouble isolation<\/td>LCT<\/td><\/tr>
Relevant electrical parts<\/td>-LU upper limit sensor (PS2)
-LU lift-up motor (M1)
-LU drive board (LUDB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

Procedure<\/h2>\n\n\n\n
  1. Check the connector between M1-LUDB CN3 for proper connection and correct as necessary.<\/li>
  2. Check the connector of M1 for proper drive coupling and correct as necessary.<\/li>
  3. Check the connector between PS2-relay CN406 (LU-207), relay CN3<B> (LU-302)-LUDB CN5 for proper connection and correct as necessary.<\/li>
  4. PS2 I\/O check, sensor check