{"id":20726,"date":"2020-06-24T13:23:00","date_gmt":"2020-06-24T13:23:00","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=20726"},"modified":"2023-12-13T18:39:09","modified_gmt":"2023-12-13T18:39:09","slug":"c0206-bizhub-750i","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c0206-bizhub-750i","title":{"rendered":"C0206 (bizhub 750i)"},"content":{"rendered":"\n

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.<\/strong><\/p>\n\n\n\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td>C0206: Tray 3 feeder up\/down abnormality<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Trouble detection condition<\/td>The tray 3 upper limit sensor (PS156) is not turned ON (blocked) even after the set period of time has elapsed after the paper lift-up operation for the drawer began.<\/td><\/tr>
Trouble isolation<\/td>Tray 3<\/td><\/tr>
Relevant electrical parts<\/td>-Tray 3 lift-up motor (M143)
-Tray 3 upper limit sensor (PS156)
-PC control board (PCCB)
-CPU board (CPUB)
-Base board (BASEB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

Procedure<\/h2>\n\n\n\n
  1. Remove the tray<\/a>\u00a0and check to see if a piece of paper is not left inside the machine.<\/li>
  2. Check the connector between M143-PCCB CN6 for proper connection and correct as necessary.<\/li>
  3. Check the connector of M143 for proper drive coupling and correct as necessary.<\/li>
  4. Check the connector between PS156-relay CN25-PCCB CN7 for proper connection and correct as necessary.<\/li>
  5. Check CPUB for proper installation and correct as necessary.<\/li>
  6. PS156 I\/O check, sensor check