{"id":20772,"date":"2020-06-24T14:14:54","date_gmt":"2020-06-24T14:14:54","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=20772"},"modified":"2023-12-13T18:38:47","modified_gmt":"2023-12-13T18:38:47","slug":"c1105-bizhub-750i","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c1105-bizhub-750i","title":{"rendered":"C1105 (bizhub 750i)"},"content":{"rendered":"\n

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.<\/strong><\/p>\n\n\n\n

When FS-539 or FS-539SD is installed<\/h2>\n\n\n\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td>C1105: Bundle eject motor drive malfunction (When FS-539 or FS-539SD is installed)<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Trouble detection condition<\/td>The gripper home sensor (PS18) is not turned OFF (blocked) or ON (unblocked) even after the set period of time has elapsed after the bundle eject motor (M10) is energized.<\/td><\/tr>
Trouble isolation<\/td>–<\/td><\/tr>
Relevant electrical parts<\/td>-Bundle eject motor (M10)
-Gripper home sensor (PS18)
-FS control board (FSCB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

Procedure<\/h2>\n\n\n\n
  1. Check the connector between M10-relay CN7A-FSCB J13 for proper connection and correct as necessary.<\/li>
  2. Check the connector of M10 for proper drive coupling and correct as necessary.<\/li>
  3. Check the connector between PS18-relay CN7A-FSCB J13 for proper connection and correct as necessary.<\/li>
  4. PS18 I\/O check, sensor check