{"id":21155,"date":"2020-06-30T11:39:42","date_gmt":"2020-06-30T11:39:42","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=21155"},"modified":"2023-12-13T18:23:58","modified_gmt":"2023-12-13T18:23:58","slug":"c7111-bizhub-750i","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c7111-bizhub-750i","title":{"rendered":"C7111 (bizhub 750i)"},"content":{"rendered":"\n

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.<\/strong><\/p>\n\n\n\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td>C7111: Tray 1 lift-up motor failure<\/td><\/tr>
Rank<\/td>C<\/td><\/tr>
Trouble detection condition<\/td>After starting the motor, an error is detected for the malfunction detection signal.<\/td><\/tr>
Trouble isolation<\/td>Tray 1<\/td><\/tr>
Relevant electrical parts<\/td>-Tray 1 lift-up motor (M12)
-Base board (BASEB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

Procedure<\/h2>\n\n\n\n
  1. Check the connector between M12-relay CN180-BASEB CN25E for proper connection and correct as necessary.<\/li>
  2. Check the connector of M12 for proper drive coupling and correct as necessary.<\/li>
  3. M12 conduction check.