{"id":21213,"date":"2020-06-30T12:13:04","date_gmt":"2020-06-30T12:13:04","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=21213"},"modified":"2023-12-13T18:23:33","modified_gmt":"2023-12-13T18:23:33","slug":"c7241-bizhub-750i","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c7241-bizhub-750i","title":{"rendered":"C7241 (bizhub 750i)"},"content":{"rendered":"\n

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.<\/strong><\/p>\n\n\n\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td>C7241: Bypass tray lift-up solenoid failure<\/td><\/tr>
Rank<\/td>C<\/td><\/tr>
Trouble detection condition<\/td>After starting the solenoid, an error is detected for the malfunction detection signal.<\/td><\/tr>
Trouble isolation<\/td>Manual<\/td><\/tr>
Relevant electrical parts<\/td>-Bypass tray lift-up solenoid (SD1)
-Base board (BASEB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

Procedure<\/h2>\n\n\n\n
  1. Check the connector between SD1-relay CN21-relay CN13-BASEB CN26E for proper connection and correct as necessary.<\/li>
  2. Check the connector of SD1 for proper drive coupling and correct as necessary.<\/li>
  3. SD1 conduction check.