{"id":21935,"date":"2020-07-06T14:26:57","date_gmt":"2020-07-06T14:26:57","guid":{"rendered":"http:\/\/localhost\/bizhubtroubleshooter\/?post_type=epkb_post_type_1&p=21935"},"modified":"2023-12-13T17:43:10","modified_gmt":"2023-12-13T17:43:10","slug":"c0208-bizhub-650i-550i-450i","status":"publish","type":"epkb_post_type_1","link":"https:\/\/apps.kmbizhubvcare.com\/bizhubtroubleshooter\/?epkb_post_type_1=c0208-bizhub-650i-550i-450i","title":{"rendered":"C0208 (bizhub 650i\/550i\/450i)"},"content":{"rendered":"\n

Please search Knowledge Base articles and Bulletins as they may contain relevant information and updated Part information such as Part numbers.<\/strong><\/p>\n\n\n\n

When PC-216 is installed<\/h2>\n\n\n\n

Contents<\/h2>\n\n\n\n
Trouble type<\/td>C0208: Tray 4 feeder up\/down abnormality (When PC-216 is installed)<\/td><\/tr>
Rank<\/td>B<\/td><\/tr>
Trouble detection condition<\/td>The tray 4 upper limit sensor (PS126) is not turned ON (blocked) even after the set period of time has elapsed after the paper lift-up operation for the drawer began.<\/td><\/tr>
Trouble isolation<\/td>Tray 4<\/td><\/tr>
Relevant electrical parts<\/td>-Tray 4 lift-up motor (M123)
-Tray 4 upper limit sensor (PS126)
-PC control board (PCCB)
-CPU board (CPUB)
-Base board (BASEB)<\/td><\/tr><\/tbody><\/table>\n\n\n\n

Procedure<\/h2>\n\n\n\n
  1. Remove the tray<\/a>\u00a0and check to see if a piece of paper is not left inside the machine.<\/li>
  2. Check the connector between M123-PCCB CN8C for proper connection and correct as necessary.<\/li>
  3. Check the connector of M123 for proper drive coupling and correct as necessary.<\/li>
  4. Check the connector between PS126-relay CN47-PCCB CN7C for proper connection and correct as necessary.<\/li>
  5. Check CPUB for proper installation and correct as necessary.<\/li>
  6. PS126 I\/O check, sensor check